Recent content by Hauland

How do i maintain alignment while drifting the pin in place? I align it , drift it and by the time its thru the keeper bolt hole is out of alignment. It was 3/4 aligned one attempt but i couldnt rotate pin to fully align hole. I tried punches/drift in bolt hole to align but got no rotation.

I removed bottom backhoe boom pin to replace hydraulic lines on boom cylinder and need some help on how to align keeper bolt once pin is reinstalled. The pin has a recessed grease zerk in the face of one end and a flat face on the end with keeper bolt hole. The lines running underneath the...

I bought a used 2005 bx23 with 150 hours on it in 2012 and had to replace the fuel filters twice over the summer (mowing season) due to engine sputtering. The filters were full of gunk especially the rear one. It is starting to sputter again and I plan on replacing both fuel filters. I was...