Recent content by handynickvt

all lights worked, cleaned battery clamps, checked fuses, toggled pto switch and "stop" lever. turned right over.

used the tractor to go up and down to our burn pile, and after letting it sit 5 hours or so after no usage problems, went to start it up and bring it back down to the garage, nothing. took the battery off, cleaned terminals charged battery, and replaced--no go. can't really understand why it...

thanks guys, i called advance, asked if they had something called a pickle fork. he asked if i was doing a ball joint or tie rod. seems like good advice all around, and i thank you for it.

i have a l35 with a bent tierod. i have gotten the arm free from the wheel side, but the press fitting on the center side will not come out easily. there is no clearance to pound it out from above, and using a tire iron as a lever is not working either. is there a easy way to free up the inboard...