GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread ZD326s Bogging Down Under Load.junk in tanks.... it is 12 years old.... parking brake kinda on
-
GGreensvilleJay replied to the thread First time in 12 years that the ATF has contacted me to request a trace on a firearm..I no longer give ANY info over the phone,too easy for the pro scammers to steal your identity. If anyone wants 'information' , I say...
-
GGreensvilleJay replied to the thread Fixing ZD326 Jack and Removing Left Fuel Tank.re: fuel line removal.... I use a 'bent, forked screwdriver' used to remove plastic 'trim' plugs. You get behind the hose and PUSH it...
-
GGreensvilleJay replied to the thread Box or Grading Scraper?.8' section of heavy C-channel with tractor chains behind does a GREAT job for 'touch up' levelling. Late farmer did that to his 800'...
-
GGreensvilleJay replied to the thread Teach me about hydraulic motors.yeah ,like a 50s' sicklebar cutter. big pulley on PTO, smaller on the 'head'. simpler, 'low tech' solution.....
-
GGreensvilleJay replied to the thread Teach me about hydraulic motors.adding to potree's post... use a 'mower deck right angled gear box 'whatever they're called. to connect to PTO shaft and another for...
-
GGreensvilleJay replied to the thread B7610 stalled with pto engaged, now will not start.'buzzing pf the starter relay' indicates NOT a 'safety switch' problem. As TXJim points out,remove all battery cables,clean them very...
-
GGreensvilleJay replied to the thread Need Codes but Digital display inoperable, 2017- L3301.yuck...typical CAN of worms... according to the diagram the warning lights are controlled by a 'computer' that gets it's information...
-
GGreensvilleJay replied to the thread Information on Splitting An L2250DT with frozen Release Bearing ?.WOW ! You get 2nd place though. MY A-C D-14 bell housing was JAMMED full of 'mouse house'. I'll try to find pictures of it but NOT for...
-
GGreensvilleJay replied to the thread Need Codes but Digital display inoperable, 2017- L3301.IF the LCD was working and displaying codes, at least it'd give the owner a 'hint' as to what might be wrong. From what's been posted on...
-
GGreensvilleJay replied to the thread safety on a hill going straight up and down.We've have lost 3-4 farmers from 'running sideways on 'little' hills' around here.
-
GGreensvilleJay replied to the thread Need Codes but Digital display inoperable, 2017- L3301.looks like 10(?) 'idiot' lights, direct drive from 'sensors' and an LCD for the 'hour' meter. I assume they use the hour meter display...
-
-
GGreensvilleJay replied to the thread New to Kubota BX2360 questions.have to ask WHY you want the rear blade on while mowing ? Also, check the front axle for oil ! yellow plug by left wheel...Most seem...
-
GGreensvilleJay replied to the thread Oil Pressure Driving Me Crazy - Not Cam Plug.I have to wonder how hot the oil is, as normally 'oil pan' heat released into the air but in the belly of a boat, it can't escape nearly...
