GreensvilleJay's latest activity
-
GGreensvilleJay replied to the thread Thinking about under fence weed control.steam shouldn't hurt the fence...kinda same as rain water... tossing galv steel in fire is a bad thing ! shouldn't do that or weld, as...
-
GGreensvilleJay replied to the thread Best Way to Drain Mower Tank?.It's probably not so much how full the tank is but how OLD the fuel is. In my case though , fuel was fine, there was an 'obstruction'...
-
GGreensvilleJay replied to the thread BX23S - Fuel cap - lockable with key.curious, any idea WHY Curtis made the cover ???
-
GGreensvilleJay replied to the thread BX23S - Fuel cap - lockable with key.I bought a 'mason jar coffee filter from TEMU for $14 (?) 2 years ago..... fits perfectly, about 7" tall, very fine screen..amazing...
-
GGreensvilleJay replied to the thread Grass rows, are very annoying how to avoid? Using the MMM..possible mowing options.. 1) hire local kid to cut the 3.5 acres of grass ? 2) whoever lives with you, might cut the grass ? 3) reduce...
-
GGreensvilleJay replied to the thread Need advice on gravel driveway repair.agree to slope from fence line to ditch, no 'crown' in the center. maybe start straight blade (no angle, or pitch) to remove the crown...
-
GGreensvilleJay replied to the thread Bad Belt Latch.Kinda makes sense as you're NOT supposed to use seatbelt without the ROPS.
-
GGreensvilleJay replied to the thread Trailer.yes, 3 by 5 is a nice size behind a 'small' tractor.I made one that size, using the worn out, 3 year old front wheels from my BX23S. Not...
-
GGreensvilleJay replied to the thread Bad Belt Latch.might try 2, thin but WIDE bladed screwdrivers. on opposite sides,twist and see if it releases the 'pins' from the 'sockets'. In your...
-
GGreensvilleJay replied to the thread L5240 HST dying, fuel or HST?.While it may be a 'PITA', I'd remove the tank and properly clean it. That way you KNOW there's NOTHING in the tank ! In my case a tiny...
-
GGreensvilleJay replied to the thread Trying to find drive belt for Kubota Z421 part # K3071-13560.It seems to be a 1/2" x 77" vbeltakak A75A or A75K, so any made with Aramid or Kevlar should be fine. One place has them for $10 US$ !!
-
GGreensvilleJay replied to the thread 12V outlet for ROPS M7060HD?.curious... since they offer a cabbed version, I would think there's a power feed under the dash ? If so ,it'll have BLUE electrical...
-
GGreensvilleJay replied to the thread Trailer.couple of huge 'red flags' to look out for 1) size and weight of trailer/load ! Your tractor only has 16HP (according to tractordata)...
-
GDownload AdBlocker its a free down load and it works
-
GGreensvilleJay replied to the thread Worn out 3-pt lift arm ball & socket - L275DT.FYI.... BEFORE you 'cut and weld'.... measure the 'eye to eye' dimension ! While not 'mission critical', always best to weld new ones on...
