Recent content by F2036

I keep seeing a FZ2100 advertized for sale. I am interested in this mower and I like the out front deck and stering wheel set up. Could any of you guys please tell me the good, and bad points on this mower. It is about 3.5 hours away from me, to far just to go look at without knowing what to...

I have a really dumb question for you guys. I have a Kubota Z724 zero turn mower and I like the mower but, what I call the control arms, or the levers you steer with are really stiff to move back and forth. They are not stuck they just take a whole lot more effort than my other zero turn...

What do any of you guys have for battery jump packs? My newest and least favorite battery charger just died and I think a jump pack to start the vehicle and get it to the shop would be handy. My L3800, B2410 and my Zero turn 724 mower all start great, but my RTV400 I'm sure has a parasitic...

Dan, I'm just plugging the cylinder hose into one side of the hyd outlet. I can use the cylinder to raise the disc mower just fine, it is just that it won't stay at the height I set it at, it wants to leak down. The next time I mow hay I will put a valve inbetween the tractor and the hyd cyl...

When I bought my L3800 I had the dealer put hyd. couplings on the back so that I could use hyd. clyinders for 3pt or towed implements. He put on two couplings to I could use double acting cylinders, which works fine. My problem is that when using my disc mower with a one way cylinder, it will...

I'm not always able to be near a Kubota dealer when I need to change oil in my 724 zero turn mower, with the Kaw. FX730V engine. I have called several auto parts stores to see if they could cross reference a kubota oil filter number (49065-0724 ) for me, I have had dismal luck so far getting a...

Thank you North Idaho Wolfman, for pointing this out. This explains the color difference that I noticed. I for one should learn to read labels better. I did lake a filter off today and let the oil drain out, replaced the filter and filled back up with SUDT2

Thanks for the replies, you guys confirmed what i was kinda' thinking I should do. The oil will get changed before it gets started and moves an inch.

Today we changed transmission filters and oil in my B2410. After changing the filters and adding new oil, and a test drive, which went just fine, I got to thinking about the oil I just added. It was in a Kubota Udt2 container I got this jug of oil from the guy i bought the tractor from last...

I have the stabilizer bars on my L3800 that you move the pin from hole to hole to adjust the length. This kind bar works really good on my L3800 ford makeing the 3 pt arms more stable. Do you guys know of any one makeing them for the B series (B2410) or am I going to make my own? Messicks...

Thanks for all of the replies. It is looking like I will be useing oil that meets the manufactures specs and not worry about the brand so much. I have always changed oil regularly and still have trouble letting my truck go past 2000 miles without changing oil. I guess that tells you that I'm...

I know this is kind of a silly question but I don't like to mix different brands of oil. I have been using Rotella T6 oil in my Kubota stuff (L3800, Z724 mower ,400 RTV ,BX 1850 )now I have a B2410 to service also. It seems that Rotella T6 is getting hard to find . What brand of synthetic...

I'm probably going to end up driving a ways to loo k at a 2003 b2410. It has a 60" belly mower and a la305 loader, with 800 and some hours on the tach, and turf tires. In the pictures I've seen it looks pretty decent. Is Is there anything I should be sure to...

Well, we got the starter out, the engineers at Kubota should have to work on what they design before it goes into production , nuff said about that. Took the back wheel off, inner fender liner comes off, release wire loom fasteners take flywheel cover to off, remove flywheel, because there are...

It will try to enguage the flywheel and then quit. My son had a big spark shower at the starter /battery cable post, ( he started before I could get the batery unhooked) so between that and the starter trying to enguage the flywheel I figure it must be the starter needs some attention.