Eikermann's latest activity
-
EEikermann replied to the thread Injection pump control sleeve timing.Well I learned a lot from this, rebuilding diesel injection pumps is probably a little bit beyond my reach to be doing in my little shop...
-
EEikermann replied to the thread Idling apparatus?.So I just need to replace it as a whole unit because my plunger is stuck in on mine
-
EEikermann replied to the thread Idling apparatus?.
-
-
EAm I missing something on how to take the idle apparatus off or do I have to pull all that other stuff off to be able to unscrew it. I...
-
EEikermann replied to the thread Injection pump control sleeve timing.No I don’t have any special equipment, and could not find anybody local to me that rebuilds them so I was gonna give it a shot and see...
-
EI bought a L3130 that was not running and from my guess it probably sat for a year or two. So after all the other problems I have got...
-
-
EEikermann replied to the thread L3130 fuel problem.So I believe I am kinda stuck temporarily, without being able to move the rack, I can’t even get the injection pump out
-
EEikermann replied to the thread L3130 fuel problem.Yes, stop solenoid is functioning correctly. I took the stop solenoid off the motor and try to manually move the rack and it will not...
-
EEikermann replied to the thread L3130 fuel problem.The rack in the injection pump should slide back and forth correct?
-
EEikermann replied to the thread L3130 fuel problem.I did see that I had a leaking crush washer on one of the injectors
-
EEikermann replied to the thread L3130 fuel problem.Took the line off the lift pump and it had a good steady stream of fuel, then while starting tractor it pulsated
-
EEikermann replied to the thread L3130 fuel problem.Ok I will check the flow going to the injection pump again. Has new fuel filter and filter housing is full. What’s the deal with the 2...
-
ETrying to start a l3130 gst that has been sitting for a year or two. I seem to not be getting any or enough fuel. I tried the fountain...
