Recent content by Dunslandloy

Was it serviced at a Kubota dealer? Lack of Kubota (Donaldson) filters is a red flag since they used Baldwin filters (which are still top-tier filters). My issue would be did they use a non-compatible trans-hydro fluid...or remove what they thought was a drain plug that actually had a ball...

Read this from the web first, then use a high quality reputable oil: Yes, it is highly recommended to let engine bearings and piston rings seat using conventional or break-in oil before switching to synthetic. Synthetic oil is extremely slippery and can prevent the necessary friction required...

Agreed! I even use Rotella T6 in My Kawasaki Teryx 800 for its superior wet clutch performance.

I switched to Baldwins on mine after I purchased an Indonesian one from the dealer. Baldwin still made in U.S.A.

One year of scalps with the 60-inch and your yard will conform to your standard with no more back talk. Grass always grows back. 😁 I went from 54-inch on my last machine to 60 on my B and I don't regret it. Also, once you wear out the Kubota blades, switch to the Oregon Gator high lift blades...

My R4's do great in the snow and soupy stuff but got me in trouble big time once in mud after a heavy rain.😉 Brother-in-law rescued me with his L3130. He had Ag tread. 🙄😆

Was fuel filter changed also. Diesel can develope fungi slime (sometimes called cold slime) over long periods of inactivity or from bad fuel. It can clog fuel filters, injector pumps and injector nozzles causing low power due to lack of fuel delivery. I run dyed off-road diesel from a single...

Found mine here😉 https://www.colemanequip.com/parts/kubota-parts/kubota-tractor-parts/kubota-b-bx-series-tractor-parts/

Strange how Kubota and Donaldson share identical color schemes on their filters. Found this snippet while researching, Donaldson's Customer Base: Donaldson Filtration Solutions manufactures industrial filters for various sectors such as mining, agribusiness, aeronautics, automotive, and food...

Are there slots where the carriage bolts attach the blower to the tractor? This would be your leveling adjustment.

That '01 Ford 650 has a Cummins in it.

Drop your skids down on each side and this will allow it to float over the gravel while maintaining level ground contact. I do the same with my rear blade. 👍

Looking to replace all o-rings on my '99 B2400 3 chamber injection pump. Have a small leak that's making a mess of the garage floor. Anybody have a procedure for doing this while maintaining fuel adjustments? Can the pump bushings be pulled for o-ring replacement without complete pump...

Thanks Wolfman. I found a local Farmall mechanic that said he would do the job for me. The family also builds competition pulling tractors. He's repaired Kubota and was quite familiar with the D1105.