Recent content by doskiez

If you do have a spot to just go out and play around in. Make sure you adjust the length of your toplink to see how that affects the cutting and smoothing actions of the blade. Good luck and let us know how it turns out.

If anyone is interested I have a 60" finish mower for sale. We got it with our tractor and have no use for it. It has three blades and a floting 3 point so it will mow at the height set by the four wheels. It is a rear discharge model and only has a slight amount of surface rust, nothing a...

If you get it, I want to play with it!!!! That would be really handy to have if you have a lot of brush around your property

I dont know how tight your space is, but I may have a trick that could work for you. If it is a normal filter you can hammer a philips head screwdriver through the center as a last resort and use it for leverage. It isnt pretty by any means but it normally works.

Welcome to the forum, I am new myself and I can tell you that this is a great group of guys and there is a lot of really good knowledge here.

Welcome, I am new here myself and have to agree with avi8tor. We just got a new (to us) tractor and it is a little too small for all the things we need. It will do 85-90 percent of what we need, but trust me you will always worry about that 10-15 percent. It is worth it to have a little extra...

Note to self.... Never mention barrel racing on the forum. On another note thanks for the compliment on the welds. I have been welding for about six years now and it is always nice to be complimented on your work. I just did a quick spray can job to keep the rust down, but I am seriously...

The tractor was able to lift all our trailers that were at the house. My sister is at a barrel race this weekend so I dont know yet if it will lift our gooseneck. Ill let you guys know when I find out.

That would be a good idea if I had thought of it and wasnt almost done with the hitch. Also we have a 2 wheel drive and I would be worried about traction with some of the trailers. I will see how it goes, I may end up doing one of each. I will let you guys know I am planning on finishing the...

Thanks for the info. I am building a traler hitch to move around all our trailers and I wanted to make sure it could handel our goosenecks. It sounds like it will from your post. I also do have a front end loader attached so I think it should be enough to couter balance. If not I can always...

At this point it is mainly play as I am new to both the tractor and the forum. I do, however, already have a neighbor that wants me to do some things around his house so I am sure I will be doing some work with it soon.

Our family just recently purchased a Zennoh zl 1501 with a 2cyl diesel. I believe it is the 18 horse model it says 15 for the pto. The previous owner said it correlated to a Kubota L 185 and I was wondering if this was accurate. I was also wondering if anyone knew how much weight the 3 point...