Recent content by doc harper

temu has the complete gear box. i had to grind off part of the bottom of the steering to keep it from rubbing. the column was not quite as long as original but worked fine. 178.00 us dollars

temu has them

i have a good alternator/regulator off a kubota L245 dt. works good, its missing pulley. will sell cheap and buyer pays shipping

thanks everyone. i found a dealer that had one. it was everything except the black indicator plate. 1st

i bought the alternator from salvage yard for 25.00 and electrical plug for 8.00. misc. bolts 4.00. simple hook up. the nissan pathfinder alt. has built in regulator to

thanks for your reply

i put a 95 nissan pathfinder alt. on a L245. almost same size. you will need a 5/16 x 5 inch bolt on bottom. 1 inch longer belt. connector plug wire from ebay. discord belt guard. yellow wire switch, green battery with red battery

i have a L245dt and i need an igntion switch. its a discontinued dealer part. just wondering if i can get one on amazon that will be a direct swap

this may work. the corvette stuff i used requires a lot of fabrication. hope someone tries the rack n pinion

give me a couple of days and i will try and send you pics. don't know if i can on this site but will try. may need to text to your phone if i can't get them to on this site. (mod edit # removed)

just to update on L245dt power steering. i used the steering control valve, some hoses and cylinder off a 1968 corvette, plus i used a power steering electric pump off a volvo 40 series. cutting and welding required. 701-601-0670

thanks for your reply

i have a L245dt kubota and im running a 12volt power steering pump that requires close to 40amps to operated right. the pump is from a volvo xc 40. has anyone every put an automotive type alternator with built in regulator. i know about the small gm type one wire but would like to put one on...

im putting power steering assist on my kubota L245dt. the conrtol valve and cylinder are from a 1968 corvette. i got this idea from kubotoed. the difference between his unit and mine is he used a engine mounted power steering pump from a nissan pathfinder and im using an electric pump from a...

just got steering unit bought and decided to go with an electric power steering pump off a volvo s40. i'll do an update when i get started