Recent content by Dgas47

Though I appreciate sarcasm, I definitely don't appreciate being insulted. I know who to believe. The proof was needed to settle a dispute. Turns out the other guy's proof was from a BX manual instead of a B. If I had a service manual then I would have settled it myself. I don't so I was...

Any chance you can take a picture of this in the service manual? Someone on Facebook is disputing this.

I have a B2601 and although the lift capacity could be higher (B2650 would be be perfect) I can still move 1,400 pounds of firewood 3' - 4' off the ground as shown. I was also able to lift full buckets (60" light materials bucket) of river rock to max height to dump over a fence. I chose the...

Never saw wood bend steel unless it was 1,700 degrees and between my anvil and wood mallet. Perhaps it backed in to something. I personally bent the top link on my 3 point after I raised it too high with the rops down and I think the replacement was only $40. Not too bad and now I have a steel...

And as far as leftover parts this is what I have.

This hose is the one I'm talking about. There was nothing in the directions. If that's supposed to be plugged then I feel like a moron.

Hopefully someone still follows this thread... Two days ago I installed this same kit on my B2601. Used thread sealant and the whole 9 yards. Ran the engine for 30 minutes and no leaks. Awesome. Yesterday I plugged the heater in for 1 hour. Came back out and noticed antifreeze leaking out of...

If you are referring to a B26 as the B2601 then I've heard elsewhere that the B2601 may get the one piece hydraulic quick connect for the 4 loader hoses to the loader valve and a way to engage the loader park stand from the seat, just like the new bxs. The "quick park" feature. I have a B2601...

Yeah, about 32" was the most I've gone. If the splitter can't split it, I don't cut it.

I'm thinking he was leaning more towards the backhoe has the ability to dig a grave...................

Personally, I'd go with a B series if you will be using it more often on the manicured lawn or the L if you're going to be using it more in the tall grass and to maintain the driveway. I went with a B2601 and it's only for gathering firewood and landscaping duty. I have a Cub Cadet Zforce...

Polaris Ranger 800, full cab, heater, manual windshield wiper, Boss fully hydraulic plow. Has handled everything we've had so far. Worst it's seen was a mix of 8" of wet and frozen snow and it pushed with no problem. There's a 1,500' access road on about a 17 degree slope next to my house. This...

Thanks guys. I tried to do everything myself with the help of my father. My dad and I set the wall, I ran all the outdoor speaker wire in conduit before we poured, 12 of us poured the concrete in one morning, 2 neighbors and I built the pavilion, my father and I set the fireplace, and I ran the...

You'll have to excuse the leaves and mess... But we used a 12x14 cedar pavilion from Costco and placed it up against an outdoor fireplace and pizza oven. Mounted a Sunbrite 46" TV to the pavilion and it's working out beautifully for us. Future plans include adding a second pavilion over the...

I would strongly consider this as a mower instead. Cub Cadet ZForce steering wheel zero turn. I have one and the thing is a beast. Cuts like a dream and leaves pro stripes with a kit. Zero turn, won't tear up the grass, and is stable on slopes due to the steering wheel. You might actually save...