Recent content by Costnsg

Status Update: I have the 3ph working properly now on my 7060. Yea! Stop reading now if the details bore you. I did download the service manual as suggested by Dustyx2 and focused on the section on position and draft control linkage. I started with the position control and adjusted the...

Thanks to all for taking your time to give me input. Much appreciated.

Dusty, that's exactly how I expected it to work. I like your suggestion on manual. I assume WSM is a service manual.

Tx Jim, I took the "Float" terminology from the Kubota Owners manual for the 7060. It seems to just mean the most insensitive position on the draft lever (full forward). I agree on all your thoughts about how it should work. I was hoping I might be doing something wrong, but I am now...

PaulL, 1. I moved speed control from full open to full closed and it doesn't allow the 3ph to lower unless I touch the draft control. I have tried this multiple times because I too think the speed control should be what would prevent the hitch from lowering. 2. I agree. 3. Seems improbable...

Yes, I did address the question about the speed control knob. It doesn't have any bearing on allowing the hitch to lower, unless in fully closed position. With speed control fully closed, the hitch will not lower no matter what I do with the other controls.

Just joined this forum and this is my first post. I purchased my 7060 early this year used with < 100hrs. It's a 2019 model. I also bought a new Bush Hog 316 and this is mostly how I have used the tractor. Recently I purchased a new 8" disc and the 3 point hitch issue is more of an...