Recent content by ck21084

This may be a bit much but this certainly would cut a large area. http://www.landpride.com/products/193/afm4216-all-flex-mowers I'm not sure that a L3200 would turn it. Sent from my iPhone using Tapatalk

Had my parents B7100 for a few years and then last year bought my first an L3200. I was 28 at the time. Sent from my iPhone using Tapatalk

I love my l3200 and 72in mowing combo. I use it to cut 10-15 acres a week and it's a breeze to use. Sent from my iPhone using Tapatalk

Update: I recently was able add a 7 way connector to the tractor. I was not able to hook up brake lights but I was able to use turn signals/hazards and running lights. I only hope this will keep idiots from killing me or my RV. Sent from my iPhone using Tapatalk

After a few late nights out bush hogging last month I quickly realized that the lights on the L3200 leave a lot to be desired. The headlights did not allow me to see if I had missed anything in the field I was cutting and I knew it would only get worse with the upcoming time change. After...

I am in the middle of this upgrade right now. I purchased an led bar from amazon from a seller by the name of all good led. This bar is extremely bright. It's states 7200 lumen and it appeared to be correct. Below is a picture last night. The person in the picture is my brother and he is...

No waxing plans yet. Lol. I think the enamel will do well enough on its own for now. Sent from my iPhone using Tapatalk

Final restore update: After 20 hours of blood and sweat and $200 in paint and supplies the cutter is finished and operational. The oil leak on the gear box was caused by the gear box being "topped off" aka over filled causing the already bad seal to leak. After draining the excess oil it has not...

After several nights of working late at the office I was finally able to get the first and second coat of orange on the top. I need to pick up one extra can of implement paint from Kubota. I will be visiting the JD dealer tomorrow to pick up the aforementioned corn head grease.

Haze, Where do you purchase the actuators and switches? I have searched sites hind and low all afternoon and can only find the horn version if the actuators. Chris

Day 3: only 45 minutes tonight but I managed to wire brush prep and paint all previously stripped areas.

Burt. I'm curious of the start date on the grease conversion. I just bought a Landpride finish mower 2 months ago and when it came from the dealer it had 85-90wt gear oil. Is this only covering the rotary cutters? I am going to get the seal replaced first and if this fails again then the...

Cerlawson. This is kinda what I initially thought too. I must drive on roads where the speed limit is 45 mph but people often drive 65-70 and pass on the double line.

Second update: day two. After work tonight I started stripping the remaining paint from the panels. I was able to get all but one area completed. This area is where the input seal is leaking so it has gear oil all over. I was able to work 1.5 hours until the rain started. Luckily I had just...

Do you by chance know the part number of the input shaft seal?