Recent content by All-clear

  1. A

    Svl95-2 air in fuel (error code 9302)

    checked flow and seems to be good. I also eliminated both water separator and spin on filter and went from the tank to the electric pump then straight to the injection pump and it still gives me the code and the injectors start clacking. Yesterday I took some old school advice and filled the...
  2. A

    Kubota Skid Steer SVL 95 2S Error Code 9302

    I checked flow and seems to be good. I also eliminated both water separator and spin on filter and went from the tank to the electric pump then straight to the injection pump and it still gives me the code and the injectors start clacking. Yesterday I took some old school advice and filled the...
  3. A

    Kubota Skid Steer SVL 95 2S Error Code 9302

    Does anyone know what psi the electric fuel pump should be putting out? And what psi should I have at the outlet of the spin on filter. Going through the same exact issue with code 9302
  4. A

    Svl95-2 air in fuel (error code 9302)

    Thank you tiger for all your help I took off from my property as I had gotten a little frustrated already I will be back there tomorrow. The machine will stay at idle for the whole day long at full throttle as soon as I put it into action it starts clicking like an injector sound and will go...
  5. A

    Svl95-2 air in fuel (error code 9302)

    Just went and changed the line from the tank to the water separator. Had good flow from the tank. Tightened up all the fittings and the same MOTHER Fing thing. WOW this shi$ Is getting frustrating! I have a big job on Monday and no dealer or mechanic is going to make it out here in time.
  6. A

    Svl95-2 air in fuel (error code 9302)

    I just read your post about the high rate of return to the tank. So I guess that I need to maybe go to the tank and check the outlet to see if it’s restricted
  7. A

    Svl95-2 air in fuel (error code 9302)

    Thanks tiger. Sorry I forgot to mention that I drained the tank completely and filled with good clean fuel. Like I said earlier I tried an aux tank and the same issue happens. I think it’s one of the pressure relief or pressure control valves as the fuel is PUMPING !!! Big time out of the end of...
  8. A

    Svl95-2 air in fuel (error code 9302)

    Thanks for the replies guys. And yes wgator I’ve read that thread back and forth. Came to the shop now and thought I’d try an aux tank to see if it’s a clog in the supply line. I used a 12oz bottle with a fitting connected to a hose straight to the electrical pump then to the injection pump...
  9. A

    Svl95-2 air in fuel (error code 9302)

    I have searched and searched before posting this and can’t find anything that discusses this exact issue. I recently purchased 200 gallons of off-road diesel from a friend of mine. I find out later that have been sitting around for about six months. Started having problems with the machine and...
  10. A

    New member introduction and question.

    Fuel filter outlet. When we had the machine hooked up to the computer the fuel temp sensor was reading -40 degrees, Could that have something to do with my issue? Also the machine sat for about a year I believe was reading the forums and saw the suction control valve on the supply pump and was...
  11. A

    New member introduction and question.

    what is it that controls the injection pump? Or do i have a bad injection pump?
  12. A

    New member introduction and question.

    Well I went to go test the lift pump and it filled a 12oz. coke bottle in about 15 seconds. seems to have a good enough flow. Cracked one of the lines on the rail and nothing, I even turned it over and NADA. Starting to thing somethings up with the injection pump. Too bad it's so hard to get a...
  13. A

    New member introduction and question.

    That’s great information. That why I love finding great forums, with great members. Thank you, I’m going to try that test tomorrow and get back to you guys.
  14. A

    New member introduction and question.

    Anyone have any experience with aftermarket injectors?
  15. A

    New member introduction and question.

    Thank you all again for your responses I had my buddy come over tonight that works for United as a technician for the rental company and he hooked up his computer to the machine and I had no real pressure so He asked me if I’ve ever gotten it to fire off and I told him yes with a rag and some...