Recent content by ALKubota

Kubota part is: 7J066-8401-0 May have to special order. Looking at the parts diagram I wouldn’t think it comes off as it’s all one piece and the button wires are likely running inside holding it as well.

I sent an email to corporate with my serial # as a heads up. Dealer has been great, they already ordered a new hose for me as I can replace myself in my garage. :) I was a mechanic in a previous life before going back to college so not a big deal at all. update: dealer gave me the hose, I tore...

I guess it let just enough squeak by. When you pulled the dipstick it felt like just a couple more psi and it would have shot out. I’ve found a little residue on the split pin twice but just chalked it up to pressure washing it. Hopefully the rear main will be ok after the fix.

Figured it out! The factory ran the breather side hose through some ridiculously small space and it has it pinched closed. I ran a borescope in from the breather side and found it quick. It’s a welded together bracket and it won’t even wiggle its wedged so tight. I don’t know how they even got...

Yep, the CCV system. I removed the hoses from the CCV catch can that drains back to the pan and contains the filter. The restriction seems to be on the side that goes to the breather on top of the valve cover. I guess the easier question is with the hose off the CCV catch can should pressure...

First post! Hopefully someone has experienced.. I have a 2019 L3901 hst with 88.5 hours on the clock and changed the oil for the second time yesterday. (First owner changed it at 60hrs right before I bought it.) After I ran it for a minute post adding oil i went to check the level after...