Recent content by Adf

  1. A

    carbide coated mower blade search

    I cant tell you ehere to get them but my BadBoy mower comes with them and they do stay sharp incredibly longer
  2. A

    b7200 steering adjustment

    Well I finally finished repairing the steering assembly after three tries. I thought I’d get away with just replacing tge upper and lower bearings but turned out the shaft was damaged as well and ruined the replaced bearings. the DIY videos were very helpful. Only thing i can add is the method...
  3. A

    b7200 steering adjustment

    I’d be interested in seeing what the “adjusting collars” look like and how yhey would adjust the steering play. Shims raise up the steering shaft so the gears fit closer i think
  4. A

    b7200 steering adjustment

    Messicks had the parts and their shipped them to me.
  5. A

    b7200 steering adjustment

    I went to check kubotabooks online manual again but that website is temporarily down but thanks Berry
  6. A

    b7200 steering adjustment

    Messicks sells all the steering components individually with a parts picture. I did find the drain plug. The manual for the b 7200 Did not show any steering component but the b7100 did. The drain plugs were in different locations. I had been taken the bolt out that i thought should be the drain...
  7. A

    b7200 steering adjustment

    Well i took it apart😳😳 There were no bearings left at all just a couple of Rusted metal circles. The oil was rust brown color. I’m thinking that the tractor sat outside a lot and somehow over time water got past the seals. The steering shaft, the gears look good. Teeth have nice sharp edges the...
  8. A

    b7200 steering adjustment

    How do I drain the oil on the steering box?
  9. A

    b7200 steering adjustment

    my steering has a lot of play in it. even after I've fully adjusted the adjustment bolt outside the steering box. I'm thinking I've got to open the gear box and see if it will take shims or if it needs to be replaced. What do you all think? thanks adf
  10. A

    Need D950 cylinder head

    Nope could not find one there. thanks anyway
  11. A

    Need D950 cylinder head

    My B7200 has a damaged head. Compression cover disc fell out and pounded seat to irreparable. All other parts are all good just need head and one piston thanks
  12. A

    Engine locked up

    I took it to the shop that just does cylinder heads they said “can’t be repaired” and explained why
  13. A

    Engine locked up

    yea, im thinking that as well. that was my original intention. I paid $3,000 for it because the bucket was barely used and not very old (it still had shipping tape on it) and was bought as a bolt on from Bush Hog for the B7200 which is also my tractor (how hard is that to find and 40 minutes...
  14. A

    B7200 cylinder head

    Need a new head for B7200