85Hokie's latest activity
-
85Hokie reacted to RCW's post in the thread Necessary to Clean Mower Deck After Every Session? with
Like.
Got it. I misunderstood. A good quality (heavy gauge) mower won't corrode away if it has some grass in it. If I'm mowing dry... -
Let it cool a bit before adding cleansing water. Do not add cold water to a hot engine.
-
85Hokie replied to the thread L2501 Overheats under load.If you want to clean the inside ........... empty carefully.....not around animals you care for........... get a gallon of...
-
-
85Hokie replied to the thread L2501 Overheats under load.I like this ONE - the angle allows a better flow in tight areas
-
85Hokie replied to the thread What’s with all the SPAM?.They are popping in so fast my little fingers can't keep up this morning ....... over 100 new "members" and the same ol sht. Kinda like...
-
Like @Russell King said - - need to relieve pressure on both the boom (lift) and curl circuits. Be careful opening the fittings...
-
85Hokie reacted to Russell King's post in the thread Can’t connect loader hydraulic latch BX with Like.
You do need to relieve the pressure on all the lines that are connected from the FEL to that mounting block. All on the FEL SIDE. The...
-
It's really simple. If you buy it, you won't get snow. If you don't buy it, you'll be buried this winter.
-
85Hokie replied to the thread L3902 vs L3560 Implements.That L3560 has about 33 HP at the PTO. (correction - 28 hp) The old adage is 5 hp per foot!! SO a 6 footer should work, then again the...
-
85Hokie replied to the thread B7500 Operating Temp." One hour of mowing tall wet grass at2000 rpm top 195,bottom 168,heat sensor was corroded, cleaned it up, got rat nest out of dash...
-
85Hokie replied to the thread B6200D Body Panels.Contact him : @Mountainman Daryl will help you I am sure!!!!!!!
-
85Hokie replied to the thread B7500 Operating Temp.Since you have a infrared thermometer - go ahead and mow, get everything good and hot - find out what the temp is at the upper neck of...
-
85Hokie reacted to hodge's post in the thread Complelty lost looking for hitch components with Like.
B series parts aren't correct. You need L series stuff- longer lift arms, longer/heavier stabilizers and side links, etc. Contact Daryl...
-
85Hokie replied to the thread Correct Baldwin Engine Oil Filter for Kubota B7100HST.I have used the B179 on all 3 of my B7100's - never a problem - as a matter of fact, many of the kubotas at work use the B179 - I have...