b4200 diverter valve issue

[jmielnicki]

I have no fluid going to the loader valve when valve is switched to it. the 3 point is operating when switched to that. The suction filter was recently cleaned as it was caked up. do I possibly have a clog in the valve? how easy is it to take apart and clean?
Thank you for any info that can help

 

[TheOldHokie]

I have no fluid going to the loader valve when valve is switched to it. the 3 point is operating when switched to that. The suction filter was recently cleaned as it was caked up. do I possibly have a clog in the valve? how easy is it to take apart and clean?
Thank you for any info that can help

How did you determine there is no fluid going to the loader? Do you have cc quick connects on the loader hoses?

Pictures would be helpful.

Dan

 

[jmielnicki]

yes i have quick connects

 

[jmielnicki]

I can take pictures in a little while
I also opened a line to the bucket piston to see if fluid was going through and nothing

 

[TheOldHokie]

yes i have quick connects

Ok. Now how did you determine theres no oil going to the loader? Visual check or an assumption?

 

[jmielnicki]

Ok. Now how did you determine theres no oil going to the loader? Visual check or an assumption?

visual check by moving joystick and checking valve and lines

 

[TheOldHokie]

I can take pictures in a little while
I also opened a line to the bucket piston to see if fluid was going through and nothing

Fluid only fliws when the cintril valvd is operated. Did you operate the valve?

What i am suggesting is one or more of the quick couplers is not fully connected or has stopped working.

Eliminate the quick coupler on the feed to the loader and check again.

 

[jmielnicki]

Yes I operated the valve
I will check connections

 

[jmielnicki]

I changed the connection ans still no fluid going to the bucket valve

 

[TheOldHokie]

I changed the connection ans still no fluid going to the bucket valve

Have you removed the quick disconnect and checked for flow directly at the outlet port?

Dan

 

[jmielnicki]

Have you removed the quick disconnect and checked for flow directly at the outlet port?

Dan

yes i took the fittings off to clean them out and cranked the engine and no fluid coming out thats why im thinking soming clogged in the selector valve

 

[jmielnicki]

ive never taking the selector valve apart just dont want any surprises looks like only 4 bolts in the front but not sure whats behind

 

[TheOldHokie]

ive never taking the selector valve apart just dont want any surprises looks like only 4 bolts in the front but not sure whats behind

Post a picture of your valve. Most are nothing more than a ball valve and nothing to clog up. Some are needle valves. I think it is more likely you are not getting it to open

Dan

 

[jmielnicki]

Diverter valve

 

[TheOldHokie]

Diverter valve

I dont think that is a diverter. Its a tap into the lift cylinder. If so you only get flow with the 3pt lever locked in the full up position.

Dan

 

[jmielnicki]

I dont think that is a diverter. Its a tap into the lift cylinder. If so you only get flow with the 3pt lever locked in the full up position.

Dan

That valve switches the flow from 3 point to bucket

 

[TheOldHokie]

That valve switches the flow from 3 point to bucket

Have you used thst valve before?

I believe I had that same valve on a B7200. It was not a diverter. Flow went into the 3pt cylinder and then out to the implement. The 3pt lever had to be locked in the full up position to use the aux port and the lever guide had a notch for that purpose.

Dan

 

[jmielnicki]

Havev I ou used thst valve before?

I believe I had that same valve on a B7200. It was not a diverter. Flow went into the 3pt cylinder and then out to the implement. The 3pt lever had to be locked in the full up position to use the aux port and the lever guide had a notch for that purpose.

Dan

I’ll put 3 point all
The way up and try that
Thank you
I have a feeling it’s something simple im overlooking

 

[TheOldHokie]

I’ll put 3 point all
The way up and try that
Thank you
I have a feeling it’s something simple im overlooking

I have that same feeling...

Dsn

 

[Russell King]

Deleted