Selling Kubota Tires and Wheels- $50 each

SonofOrange

Member

Equipment
L245F with 1200 loader, T1870, AT70, GL-5500(S)
Sep 1, 2021
101
8
18
Monroe, GA
We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.
 

Attachments

kubotafreak

Well-known member

Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
Sep 20, 2018
1,019
372
83
Arkansas, US
How wide are those 18" wheels? What is the bolt pattern size? (img 3329)
 

jimiddle

New member

Equipment
L245DT w/loader, brush hog
Oct 14, 2021
1
0
1
Brownsville, OR
We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.
We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.
Looking for a front rim for 7-16 tire. Rim would measure 6" wide X 17" diameter.
 

SimonDewing

New member

Equipment
l245DT
Oct 19, 2020
12
0
1
Texas USA
We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.
I am looking for a front wheel for my L245DT to replace one which has rusted out.

The 16x5 you picture above could well be it

I am away from the farm at the moment so can't go an measure it but I see from the ID on your post that you have an L245.
If its a DT any chance you can check if you have one (or maybe a pair) to fit amongst your for sale collection?

Rims are definitely 16x5 and its a 6 bolt pattern with a relatively small diameter (4 3/4 or something similar) from memory but don't quote me on that.

If you can't check against yours, can you give me the bolt pattern, center hole size and offset for this rim?.

Front tires on my tractor are 700x16 AG R1 tread.

Thanks

Simon
 
Last edited:

SimonDewing

New member

Equipment
l245DT
Oct 19, 2020
12
0
1
Texas USA
I just found some reference pics whilst looking through my phone, bolt pattern is 4 3/4 inch and center hole is 3 1/2 inch give or take.

If your rim fits can you put my name on it and we can figure out shipping?


IMG_1734[1].JPG IMG_1735[1].JPG

I also need an 11.2 x 24 rear tire for the same machine, do you have one in your collection?

What price for shipping?
We are in Tx 75929 (Broaddus)

Thx
 

SonofOrange

Member

Equipment
L245F with 1200 loader, T1870, AT70, GL-5500(S)
Sep 1, 2021
101
8
18
Monroe, GA
I just found some reference pics whilst looking through my phone, bolt pattern is 4 3/4 inch and center hole is 3 1/2 inch give or take.

If your rim fits can you put my name on it and we can figure out shipping?


View attachment 68325 View attachment 68326

I also need an 11.2 x 24 rear tire for the same machine, do you have one in your collection?

What price for shipping?
We are in Tx 75929 (Broaddus)

Thx
Morning, I know we don't have the wheels for the front. I'll be back at the farm today or tomorrow and check on the rears.
 

SimonDewing

New member

Equipment
l245DT
Oct 19, 2020
12
0
1
Texas USA
Morning, I know we don't have the wheels for the front. I'll be back at the farm today or tomorrow and check on the rears.
OK thanks, its the front rim I am really desperate for, they are and odd bolt pattern and not many good ones around.
Mine has rusted where it was sat with a flat tire and sunk into wet ground for a number of years.

Probably should have been a parts machine but where is the fun in that so trying to get it working again.

The rim edge is very shallow, and I have not found a matching scrap rim yet that matches to cut a repair section and weld in.

Rear rims are OK, just need a tire for that and can get a new one if shipping is not economic.

Simon
 

SonofOrange

Member

Equipment
L245F with 1200 loader, T1870, AT70, GL-5500(S)
Sep 1, 2021
101
8
18
Monroe, GA
OK thanks, its the front rim I am really desperate for, they are and odd bolt pattern and not many good ones around.
Mine has rusted where it was sat with a flat tire and sunk into wet ground for a number of years.

Probably should have been a parts machine but where is the fun in that so trying to get it working again.

The rim edge is very shallow, and I have not found a matching scrap rim yet that matches to cut a repair section and weld in.

Rear rims are OK, just need a tire for that and can get a new one if shipping is not economic.

Simon
Sorry, we don't have anything that fits what you are looking for. I wish we did, I'd like to have spares. My L245 sat for about 15 years, it's been fun getting it going again. I'm down to all the little things that don't work or leak.
 

73L260

New member

Equipment
1973 L260
Oct 25, 2021
2
1
1
Lockport, Mb Can
We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.
Needing a back wheel for a L260 Tractor. 24x11 Wheel. Bet shipping to Winnipeg, Mb Can would be quite a bit.
The outter 1/2 of the wheel (Rim) would suffice.
 

SonofOrange

Member

Equipment
L245F with 1200 loader, T1870, AT70, GL-5500(S)
Sep 1, 2021
101
8
18
Monroe, GA
Sorry, we don't have anything that fits what you are looking for. I wish we did, I'd like to have spares. My L245 sat for about 15 years, it's been fun getting it going again. I'm down to all the little things that don't work or leak.
I do have these for fronts. They don't fit my L245, but they are close.
 

Attachments

SonofOrange

Member

Equipment
L245F with 1200 loader, T1870, AT70, GL-5500(S)
Sep 1, 2021
101
8
18
Monroe, GA
Needing a back wheel for a L260 Tractor. 24x11 Wheel. Bet shipping to Winnipeg, Mb Can would be quite a bit.
The outter 1/2 of the wheel (Rim) would suffice.
If I have one, it'll have a tire on it. We could have it removed. I can check this week.
 
  • Like
Reactions: 1 user