54" bucket question

[1greenthumb]

Hello all,
Should a new 54" bucket come equipped with a bolt on "wear bar" along the lower leading edge of a new bucket? or, is that an option I missed? There are holes along the front edge of the new bucket. New B2601 delivered yesterday afternoon with a mid-mount mower, front end loader, grapple and 3rd function valve installed. Bucket was also delivered but of course not currently attached. Yeah I know call the dealer, closed at noon today. So I'll have to wait until Monday, I have to stop by there and pickup the operating manuals anyway.
Just thought I'd ask, can't find a definitive answer on Land Pride web-site or the intewebs.
Thanks
Greg

 

[Matt Ellerbee]

The bolt on cutting edge is an option.

 

[1greenthumb]

The bolt on cutting edge is an option.

Thanks, wish I would have known that, would have ordered with everything else.

 

[Matt Ellerbee]

Thanks, wish I would have known that, would have ordered with everything else.

Do you need a smooth edge or teeth? There are some options out there.

 

[1greenthumb]

Sure, options are great, let's here them. Don't know what the LandPride one lists for. Smooth for now, no need for teeth.
Thanks

 

[Matt Ellerbee]

If you need smooth, just go with Kubota one. Though I think BXpanded makes a smooth bolt on. If teeth are needed, BXpanded or EA both make a nice product.

There are probably others out there, these are what everyone likes here. And I just installed my EA a few days ago.

72” bucket. Kinda wished I went with the other mounting option, that uses the bucket holes, but this shouldn’t give me any problems.

 

[1greenthumb]

Thanks for the replies, anyone have a Kubota part #. Is 70060-03528 a correct # for a 54" bucket, need to ensure bolt hole spacing is correct and I would like the correct hardware as well. Kinda pissed that the local dealer didn't even mention it. I will be seeing them tomorrow to pickup the manuals/literature for the loader/3rd function valve and if theres anything provided for the bucket/grapple.
Thanks again,
Greg

 

[NewOrangeMan]

Thanks for the replies, anyone have a Kubota part #. Is 70060-03528 a correct # for a 54" bucket, need to ensure bolt hole spacing is correct and I would like the correct hardware as well. Kinda pissed that the local dealer didn't even mention it. I will be seeing them tomorrow to pickup the manuals/literature for the loader/3rd function valve and if theres anything provided for the bucket/grapple.
Thanks again,
Greg

I was fortunate to see it and purchase it with my new LX2610 at the time. The part your looking for is item #58513 / 9022504346-N30 or Kubota B2373 bolt on cutting edge for the 54" quick attach bucket.
Bryan

 

[19thSF]

I was fortunate to see it and purchase it with my new LX2610 at the time. The part your looking for is item #58513 / 9022504346-N30 or Kubota B2373 bolt on cutting edge for the 54" quick attach bucket.
Bryan

I would vote for the BX Expanded Pirahna Tooth bar if you are looking for a tooth bar. . I really like mine!