I have a Kubota L3301 with an RCR 1860 - 211 hours. Hit a small pine stump while mowing Sunday and somehow bent one of the blades. It has a 25 degree bend down about 1/3 from the tip. Purchased new blades and installed yesterday - while testing noted much more vibration on the deck than before - the vibration increases when I power up and decreases when I step on clutch - could the shaft be bent - looking for suggestions.
Still cannot figure out how the blade got bent on the small stump - stumped on that
Thanks in advance.
Still cannot figure out how the blade got bent on the small stump - stumped on that
Thanks in advance.