CountryBumkin
New member
Lifetime Member
Equipment
BX2370 w/LA243, Bucket, Grapple, QA Pallet Forks, 60" MMM, rear blade & rake
I have a little BX2370 with pallet fork attachment. I bought a pole barn kit. The posts are 8"x 8" x 18ft. I need to set into 18" x 48" holes.
My tractor can lift and carry the poles flat, but I need to lift them standing up right to get into holes.
Has anyone done this? How?
I saw a YouTube video https://www.youtube.com/watch?v=JaPCwuFGvM0 where the guy used a pallet on the forks to hold posts near fork tips and a strap around the post about 5 or 6 ft up from bottom.
However his posts where smaller and his tractor is bigger.
Is there a safe way to do this - or do I need to rent a lift of some sort.
My tractor can lift and carry the poles flat, but I need to lift them standing up right to get into holes.
Has anyone done this? How?
I saw a YouTube video https://www.youtube.com/watch?v=JaPCwuFGvM0 where the guy used a pallet on the forks to hold posts near fork tips and a strap around the post about 5 or 6 ft up from bottom.
However his posts where smaller and his tractor is bigger.
Is there a safe way to do this - or do I need to rent a lift of some sort.
Last edited: