Search results

Hey folks , I'm looking at a TnT kit from Messicks for my l3301 HST tractor . Has anyone here got one ? Is the travel of the supplied rams suitable for these tractors ?Looking at the pic it doesn't look like the hoses are very long ? The kit does not come with the valve or the hoses to the valve...

My power steering started feelin like it wasn't workin yesterday . if I gave it a bit more throttle it started feeling better . It hasn't done that in the past . I went all through the FSM & owners man & I can't find anywhere a power steering pump or reservoir anywhere . I can find mention of a...

I have a l3301 HST & noticed yesterday that with one wheel off the ground & can not rotate the wheel . I have the H-M-L lever in neutral & the foot pedal in the neutral position . Is there some way to have the back wheels freewheel ? I am at the stage where I need to readjust my chains for...

Are any of you folks using a grease pump & buying 5 gallon buckets of grease ? , If so what are you using , where are ya gettin it & whats a pail go for ? I have @ 2.5 gallons of the Chevron red tacky grease left in my grease pump from my Case 580's that I hope to not have sittin around soon ...

I want to drill & tap a few holes in the frame on my LA525 loader . I want to drill the frame upright to make a place to put my cane when I'm using the tractor . I've looked it over pretty good & I'm pretty sure it won't be a issue but thought I'd put it out there incase theres somethingI'm...

Not sure if this post belongs here or the fab forum . I have. 3301HST with a LA525 loader which has a SSQA bucket @ 65" wide . I have a bunch of new bucket teeth & shanks left over from when I was going to re-tooth one of the buckets on my Case 580 . SO I want to make a tooth bar for the loader...

I gave a bud the name of the dealer I bought my backhoe & subframe kit from to get a quote for his tractor & they came back with a installed price . When he asked to buy just the subframe kit & hoe they said they wouldn't sell them uninstalled cause of warranty down the road . I bought mine 2...

Hey folks , Ive searched & I can not find a parts list for the upper steering column . I have a ton of play in my steering wheel & from what I can see without pulling the steering wheel is it looks like there's a rubber bushing that's very worn . Does that sound right ? I was thinking of pulling...

Happy new years folks . I have a 3301HST with a Lorenz double augar blower on the back . A lot of times it seems that its pushing the snow instead of blowing . PTO speed is fine & driving speed is slow . I just was watching my wife using it & if she backs up theres a big pile on one sid with...

Didn't see anything for a 3301 here . Anyone running a QH with a snowblower on a 3301 HST ? Good idea , bad idea ? thanks animals45

Hey folks , I have a L3301 HST with loader & a BH77 . My snow blower wants hydraulics for chute rotation . Since I'll have my hoe off is there a way I can get a hydraulic 2 spool valve & plumb the BH lines into it & have it do the rotation & use that spool valve as a start for a TnT setup ? When...

Hey folks , like the title says I have BH77 on my l3301HSt , When the hoe is not being used you unhook the hoses from the hoe & Plug the hose into a coupler which is mounted to a bracket that comes with the BH77 kit & make a loop so the pressure has someplace to go . The upper 3 PT lift arm...

I have a 3301 Hydro & have been trying to find info on the cruse control for these tractors ? How does it work ? The youtubes I've seen are pretty much about installing them . I haven't been able to find the part # for one so I could look at the manual . thanks animals45

I did a search and came up with zilch . What grease are you folks using ? The manuals that I have call out for multipurpose grease . I've been using that & it's getting close to replace the cartridges in my grease guns . ON my Case 580's I was using that super sticky red Chevron grease , forgot...

What are you folks using for a trailer hitch ? . It looks like there's a provision just under the PTO where a guy could use a hunk of thick flat bar that will slide in & just use a pin to keep it captive ? thanks animals45

Evening folks . I just scored a Lorenz snowblower for my 3301 Hydrostatic . The chute has a hydraulic motor for aiming it . I don't have any rear remotes , but I do have the hydraulic loop in back for the backhoe . Is there a way I can use the backhoe circuit ? I've rebuilt a lot of rams but...

Like title says , what size wheel spacer do I need to put tire chains on the rear of my L3301 ? Next question , Steel or aluminum ? any sources you folks recommend ? I Have the chains & was about to put them on , but last nite & saw a youtube sayin I needed the spacers . thanks animals45

Hi there , I have a HST L3301 with a loader that has the quick release bucket . I have been looking for a front mount snow blower & found one today that the guy says it hooks up to a front 3PT . It get's it power from the rear pto & runs a driveshaft up to the front of the tractor . I have...

howdy folks , new owner of a new to me 3301l & I think it was trying to do a regen today , but I didn't have my manual with me to see what was going on . My question is , is the Parked Regen Switch a latching switch or just a momentary & are the lights in the switch replaceable ? thanks animals45

hey folks , I bought a 3301l a few weeks back &will finally have it in my posession this wekend . It did not have a backhoe & I would like to get one . I know there is the BH77 out there but what are my other options ? I DO NOT want a 3 pt hoe . I understand that I will need the subframe kit...