Search results

Fed cattle set out roll bales

Thank You . I waited for our brother in law to bring some of his tools home from his shop . Parts replaced all is working good. Thanks again

Replacing the ball joints on the tie rods . Anyone know what size wrenches that it takes? Looks like one might be a thin wrench . On a M5030SU Thanks

Will do. Didn't really see any problem but I did clean the connections. We will see when we get home from work tomorrow.

I have the right 15A fuse . If what we did today don't work I will unplug everything and start plugging things back up to see which light or connection blows the fuse if it blows tomorrow. I cleaned everything connections for the headlights behind the grill. I am hoping that takes care of it...

I took the grill off and unplugged the headlight wires. Did not blow the fuse till I plugged the headlight wires up and turned from dim to high. So I unplugged everything took the bulbs out and cleaned the connections , the filaments were clean. I cleaned the terminals where all the connections...

Having trouble my M5030SU has been blowing the headlight fuse. Have checked wires all that I can see they look good. Put in a new fuse and all the lights work then next time go to turn the headlights on it will blow the fuse. I am thinking about replacing the headlight switch to see if the...

Thanks I was wondering what you found. Sounded like mine I guess I lucked out with a defective filter. Good Luck

I will agree with that. If it is still new and under warranty. Don't do anything until you check with the dealer. It might be the dealers baby to get going free to you. Don't do anything to void your warranty. I don't have any equipment new enough to have a warranty. Checking with the dealer...

Possibly water in the fuel also.Its not uncommon to get a dose of bad fuel from gas stations. I would drain some fuel if possible or take fuel filter off and pour it into something so you can see if you have any water in the fuel if so change fuel filter and put something like power service or...

Two years ago, on my M5030SU. after we got into mowing our hay my lift and front end loader started doing what you are describing. I checked fluid level to see if low and it wasn't so we were busy with the hay I went ahead and used it. Then the tractor developed a small leak coming off the...

I saw one at a Kubota dealer near Cincinnati OH last summer 2010 and turned around went back and asked about it. The dealer said they had a demo being used by a contractor that pulls a batwing bush hog mowing powerline right of ways and said the contractor was well pleased with it. No flat...

An arm and a leg. Couldn't resist. At least you will have a like new engine on a good tractor. This is a good site for info on Kubota's. Someone will have the answer for you. Good Luck

Went to the Farm Machinery Show in Louisville yesterday and I saw a M95S Kubota that had the differential lock for both the front and rear axle. I don't know what year the tractor was it was newer than my M5030SU but the pedals were smaller than on my tractor so it looked like it would be...

I would insulate the pole barn put heat to keep moisture away from the implements.(Keep away rust). Refrigerator Sofa TV Radio AC for the summer This would be a good pole barn to keep tractor and implements in. Also If you get kicked out of the house, It would make a good dog house to stay...

I am not to good on the computer I will try to get you some pics. But the pedals are on the right side behind where your right foot would normally set and there are 2 pedals instead of one. One goes to the front axle and one goes to the rear. I am hoping to go to the National Farm Machinery Show...

You will like the loader. You won't believe how much more use you will get out of the tractor. I hardly ever take mine off. A loader is the best investment you will make for your tractor.

My M5030SU Kubota 4WD has differential lock on both the front and rear axle. However one or the other can be locked at a time unless you are holding the steering wheel with the front wheels straight ahead not in a turn then you can lock both together to try to get out of a bind. All 4 wheels...

In my M5030SU Kubota I use Rotella T 10W-30 for the last 10yrs. Kubota has 10W-30 oil we used to start with until I found the Rotella T10W-30 at Walmart. I run it yr round in the tractor. In my 97 Dodge with 5.9 Cummins the only thing since the truck was new I have used Rotella T 15W-40. It...

I have a Bush Hog 3008 pull behind not 3pt hitch. I really like how it cuts I don't think you would be able to keep the front end on the ground with a M4030. My M5030SU would not handle it if it was 3pt hitch. The offset would be nice. I went with the 8ft size because of getting through gates...