Search results

Thanks for the tip. Put 3 one gallon jugs + 1 quart of UDT2 Was careful not to waste a drop. Drove it for a bit and still low on the stick. Just below the bottom hashmark. How much more does it need?

You and me both. Maybe we should give up the Zero Turn and start pushing. Found the drain plugs on the axles and got all the fluid drained. After a quick trip to AutoZone for a filter wrench with teeth I was able to remove the lower filter. Now I’m having issues refilling. Got 2 Gallons...

Thanks for the link. Will come in handy in the future. Yep. Found the bolts and have it all drained out. Now to remove the filters.

Think I found it. Let you know a little later.

Thanks for such a fast reply. Do you have a picture? The one I removed looked like a Grade 8 with washer it was a long bolt. Pulled it out and it was dry with grass and dirt on the end.

Hi Working on changing the transmission fluid a ZD326. Removed the very large drain plug from the bottom of the pan. Pulled the dipstick. Just over one gallon of transmission fluid collected in the drain pain. Are there other drain plugs which need to be removed? Thought there might...

Think I just used a 27mm socket from HF. Now I need to figure out how to drain out all of the fluid.

Old thread I know but the question is how do you get it off? Will all of the coolant drain out of the drain valve on the side of the block or must one remove the drain plug on the bottoms of the radiator as well?

Hello Digger The rear discharge deck must be nice. I can imagine that keeps down the flying grass that just has to get sucked into the engine compartment. This must be a DIY project as transporting the ZD326 to the closet shop would be over $200 round trip. Can you believe I have a Kubota and...

Hi Mikester Definitely don't want to skimp. Hope to keep this thing running for the foreseeable future with no major issues. This must be what its like to own a Benz.

Thanks for the resource need to grab the Serial Number and then they said they could get me pricing.

Hello from a first time poster. It has been awhile since I have performed any maintenance on my ZD326 , the Kubota Reseller has closed its shop and moved far away. With just over 350 hrs I would like to do a complete fluid and filter service. Have serviced some of the items in the past but...