ZD326 Transmission Fluid Drain

[Five Acres]

Hi

Working on changing the transmission fluid a ZD326.

Removed the very large drain plug from the bottom of the pan.

Pulled the dipstick.

Just over one gallon of transmission fluid collected in the drain pain.

Are there other drain plugs which need to be removed?

Thought there might be one on there right and left axle.

Removed the bottom bolt on the LH side but it was just a bolt and not a plug.

How do I get the other two gallons of transmission fluid out?

 

[Saxman]

Both axle housings have a drain. They look like bolt heads but are actually drains


Sent from my iPhone using Tapatalk

 

[Five Acres]

Both axle housings have a drain. They look like bolt heads but are actually drains


Sent from my iPhone using Tapatalk

Thanks for such a fast reply.

Do you have a picture?

The one I removed looked like a Grade 8 with washer it was a long bolt. Pulled it out and it was dry with grass and dirt on the end.

 

[Five Acres]

Both axle housings have a drain. They look like bolt heads but are actually drains


Sent from my iPhone using Tapatalk

Think I found it. Let you know a little later.

 

[wgator]

Think I found it. Let you know a little later.

Incase you didn't find them, download the WSM HERE and look on PDF page 147.

 

[Five Acres]

Incase you didn't find them, download the WSM HERE and look on PDF page 147.

Thanks for the link. Will come in handy in the future.

Yep. Found the bolts and have it all drained out.

Now to remove the filters.