Search results

Tractor: B2650 ROPS Property: - 5 acres, flat terrain - 3/4 acre of managed/irrigated lawn entirely bordered by either woods or gravel. - Approx 600ft+ of gravel driveway Purposes: - Weed/brush control on edges of lawn and woods/brush around lawn - Weed/brush control in and along gravel...

72" Land Pride GS1572 or 72" EA Land Shark 5.1 In this case going on a b2650 to be used on flat ground, sand and gravel. Question is more so about which is a better build in function and quality OR are they about the same and go with the best pricing at the time...

I've been using an Agrifab lawn sweeper behind my B2650 but it has a single solid axle and wheels that just suck. When you turn they want to pop off because their edge grabs into the ground and get drug sideways verses rotating around. You need to take REALLY wide and gradual turns which makes...

Are the Land Pride Quick Hitch and John Deere iMatch the same specs such that any iMatch compatible implement will fit the LP QH and vice versa?

What chipper are you using with your B2650? How do you like it? Pros/cons? What size and type of material have you run through it?

On gravel with r4 tires, how much weight can a b2650 drag vs push? Task is trying to move a 20' shipping container which weighs 3500-4500 lbs?

Looking to outfit my B2650 with a landscape rake, eyeing up the LR1672 because it will cover the width of the tractor when fully angled. Primary tasks will be some woods trail grooming, piling of debris, sticks, etc to grapple away. Also plan on using it for finish grooming of my gravel drive...

Is there a place I can order the FEL stand legs for my B2650 online to replace my current ones. First time trying to disconnect the FEL and I guess I didn't have the bucket curled down enough, wound up making contact with the legs first and it didn't take much to bend them pretty badly. I bent...

Pretty cool, just saw this now. Video was published in October. Certainly a combo of functions, although I can see the grapple function being just fair. https://www.youtube.com/watch?v=YL_KUZ-NPPY

Ok, so I'm on my final evaluation before buying a mower for the upcoming season...I've been debating this for way too long. I have 5 acres of land, for which I bought the B2650 ROPS to do the work and it's been excellent from gravel driveway maintenance to woods clearing...shame we didn't get...

I've been doing some and plan on doing a lot more brush moving. I've seen the warnings against the potential damage to the stock grill and radiator. Unfortunately I'm not a welder, so I guess my options for adding a grill guard are to find one, or to learn to weld, or see if there is an...

Not sure what happened, but the hydraulic top link on my B2650 is leaking right behind the washer where it mounts to the top link tube. Yesterday while doing ground work I noticed a small leak, which then started squirting. Found the nut itself was loose, so I tightened it up (snug/firm...

What's the best way to spec out a pulling chain for my B2650? Sandy soil, just looking to dig out and pull some small trees and small stumps. Nothing huge, lot of pine with a big taproot and then smaller root systems. A lot I get up and out with the buck and Pirahna toothbar, but for the...

Figure most are wearing some form of Carhartt but figured I'd see what everyone recommends for those of us with open tractors working outdoors in the winter plowing/blowing snow and doing other chores where you'll be less mobile than on foot! What ya have? How do you like it? How's the...

OK, so along with being a first time tractor owner, I have no experience wiring anything but I'm great at following instructions. At one time I used to solder and wire digital cameras to build home made trail cameras thanks to very helpful instructions from the board builders. So the ability...

Is it possible to use a tree puller on a B2650? Or is there just not enough lifting capacity to use one? I have a bunch of overgrown pine and oaks in the 2"-8" diameter range that I'd like to clear out. There's an old trail/road that was cleared many years ago before I bought the place and...

Top Tilt Kit Grease Fittings? Are there grease fittings on a top and tilt? I just hit my first 10 hours and was greasing fittings, figured I'd find some there, but see none...just two hydraulic lines going into each. This is the one my dealer used: http://www.bare-co.com/files-hydraul2001-hy23

What is the method to regrading a sand road with a box blade without it turning into a soft mushy mess? I like the look of the natural sand road so don't want to use crushed concrete or millings. There are numerous pot holes and a couple large puddles (10-15 ft x 6-8 ft). Can I just bucket in...

Sorry for the beginner/elementary question, but part of the instruction manual confused me. I was looking at the startup and shutdown procedures for the B2650, and also the 50 hour break in notes and had a question. The startup procedure says to start the tractor with the throttle lever set to...

So I lock in the order for a B2650 with various add-ons on 08/31/18 to take advantage of the implement discounts and the financing options. I was told there were 3 financing options at the time: 1. 0% down, 0% interest for 60 months 2. 10% down, 0% interest for 72 months 3. 20% down, 0%...