Search results

Jerry, I no longer have my L175. Gave it to a friend as I bought a B7510. I'll search for some photos that I had taken. I can tell you that putting the forks on, while seems challenging at first, it gets easier w/ multiple tries :) Be sure that you knock the ends out on the top plate for each...

guys check this out. do yall believe this is a good deal? Kubota B7100HST-D, 4x4, 3 cylinder diesel, hydrostat with hi/lo range, 2 speed rear and mid PTO's, Category 1 three point hitch. Tractor is in very good condition. Ready to go to work. It is a 17 hp tractor with over 476 hrs on it. I...

if you do not have any weight on the 3pt, it could not lower depending on how stiff it is or isn't. Have you tried standing on it and lowering to see if it goes down? also replacing the stainer filter is a great place to start. You can clean these, but the last one I changed only cost me $15...

just happened to be looking around on this site at what was for sale and here is the exact tractor you mentioned with the FEL. it is a 2005 http://www.orangetractortalks.com/forums/showthread.php?t=3567 I spoke to my Kubota dealer the other day and was asking about different tractors (Under 30...

it is not a B series tractor it is an L series tractor (L2800) and it is 30hp with 25 hp at the PTO. You will have no problem box blading with the 6' blade. However, I think you will be much better off with a 5' brush mower versus the 6' as the 25hp at the pto will drive it much better. However...

what HP is that tractor. You can buy a new L2800 right now for around $12k brand new. Kubota is trying to get rid of them. thats a fully loaded out 28 hp tractor. At least that is what my local Kubota dealer has it for.

after serveral trial and error attempts, I got the the forks back on the rails. What you need is called a Pin Knock. I bought a nice set from Lowes for $12. This allows you to knock the pins out forks and rails with out doing any damage. With the pins removed, you can now slide the forks up the...

I got Mad Max home and removed the top plate on the transmission that houses the Gear and PTO stick Shifts. I couldn't really tell if the forks were bent so I removed the bottom part of the plate and lifted the entire mechanism out with the forks. The forks are fine. It appears that the end of...

Thanks Vic. I'll give that a look. My cousin was suppose to drag Mad Max home from the camp yesterday but left it cause his wife was on him to get home. I'll have to check it out when I go up Friday morning. Bow Season opens October 1st in MS. :D thanks

The reverse on my L175 tractor would no longer stay in gear. It would jump out as soon as the clutch was released. I thought I could correct the problem by removing some free play by adjusting the Pedal Link. I tightened the pedal link and when I went to re attach it to the Clutch Link(the...

forgot to post link itshopmanuals.com :D

I have the I & T Shop Service Manual. it covers multiple models and is excellent. it covers L175, L210, L225, L225DT, L260 and a bunch more. Is there something in particular you need info on before you order?

Any front rims for a Kubota L175?

there are a few good videos out on Utube about rebuilding a Kubota Steering box. Just search for it and you'll see a video with VICK.