Search results

If u look close at the Male spline u will see it will have a wide spline at the very end that will match with a wide slot on the female side it's tough to see wiping grease off the end I did the same thing when I did mine until I noticed the wide spline

Ive noticed when i reattach my loader on my bx 2370 when i curl the bucket down to get it to rock the loader arms into the cradles on the tractor if i stop half way to readjust something and then go back to curling down it starts curling up moving the loader arms away from the tractor i thought...

They don't put fender liners in them anymore because in the past they would hold mud and water underneath them and rot the fender out just look at all of the 92-96 body style f150s put there u will see what i mean.but the paint will get worn off and all u will see is the gray underneath the...

Here's my set up pouring from 5 gallon cans got old real quick

Here in central illinois you have to have a foid card to buy or own a handgun or rifle also to buy or posses ammo too it cost like $10 every 7 or 10 years to renew it. It's all completely useless you can see how well Chicago is getting along with their dumb ass laws they r actually stricter up...

Im talking about a knob think outdoor water faucet idk if your model has this or not but its a knob if you turn it clockwise it slows the hydraulic flow to the 3pt the more u turn it the more it slows all the way till it wont move at all if u turn it counterclockwise it speeds it up

Is there a knob that controls how fast the three point lowers to the ground sometimes it get bumped and closes and that will keep the arms from lowering if u find that knob turn it counter clockwise and see if that works

We have one place around that it ethanol free but what dad and I do Is get premium gas from shell or BP which both have ethanol and then treat it with stabil and seafoam and we've never had any issues weve done this for years everything always fires up in the spring

Best way I found and this is what I did on my bx2370 is use this optimate sae socket just drill a hole on the left side of the dash slide in the socket then hook up your pigtail to your battery and plug it in is literaly a 5 minute project I also suggest a good step drill bit to drill your hole...

It's pretty easy for the 050 oring to get messed up on your bowl just make sure it's down in the groove good before you screw it In you should be good then unless the oring is cut or torn maybe a little oil on the oring maybe help it seat better too.

Offroad fuel is low sulfur now so it makes no difference what you use.

Nice I made on last year too i went with 3 shanks

Yes u can if the oil filter is vertical but nowadays for fuel filters you shouldn't because the hole you pour fuel In on the filter is actually the clean side most fuel filters any more say do not fill on The side at least for bigger equipment

Another thing your factory bulbs are going to be a 896 model bulb the 881 replaces that number if you look under the specs on that link I posted you can see all the number bulbs this 881 bulb replaces

They r just as bright if not brighter than stock plus they ain't the ugly yellow color when they're on I also have a 14 inch 2000 lumen light bar on the top of my rops so I had to get led headlights to match that lol also i couldn't believe the amount of power the stock ones used whenever I had...

https://www.superbrightleds.com/moreinfo/led-replacement-bulbs/881-can-bus-led-bulb-27-smd-led-daytime-running-light-led-tower/2265/5148/ these are the ones I put In My bx2370 they r the direct replacement the work great they plug right in no modification at all ive ordered a few things from...

I just fill up my fuel cans at the station then bring them home and dump it into my 55 gallon drum using a mr funnel I used to filter it at the station but all the bubbles in it from the pump really slows down the funnel so by the time I get it home the bubbles are gone and I can pour it into...

Battery tender and winter power service in your fuel you'll be good and run your glow plugs a little longer

Just use the kubota super udt2 for the transmission better safe than sorry it's not like u have to change the oil every month its.a 400 hr service interval if I remember right . You don't have to change the hydraulic oil at 50 hrs anyway just the filter I changed mine at 50 In My 2370 for the...

SSQA sure is handy but 99.9% of the implements that fit on it out there are to heavy to be useable so hopefully kubota or landpride will start making light weight things for it.