Search results

I added power steering several years ago and it did decrease the flow for the FEL. It was not so great of a decrease that it really affected what I do with the tractor, I even have a small power steering pump that I was going to mount on the tractor but I would have to cut the side panel an...

Update: New pump is installed and works great. I did have to remove the FEL, not as hard as I thought , pump fit is tight but doable . Changed the engine oil and filter only had 28 hrs on it. I debated changing the hydraulic oil and filter also only had 28 hrs. on it. But it would bug me ...

After looking mine over, it looks like it is going to be a PIA to change especially with the FEL on, and that is going to be hard to take off with out hydraulic. I will let you know how it goes. I ordered the base gasket from Kubota . $5.00 for a small gasket, I should have just made one...

I ordered one from them yesterday. If I had seen this post sooner I could of saved myself some money. I received an e-mail from them confirming the sale but no information on shipping date. mike

I just did the same ,and did not register as a business owner. the total including shipping to the U.S. was $183.00 that quite a bit of difference.

No VAT charge

I just checked their web site again an for pump 5p1/41041gpo the price is 101 pounds plus 1 pound for package plus shipping . total 131.80 pounds or $183.00 us mike

Some people on here have used a replacement pump from White House Products in the UK . It is a 6gal/min right hand rotation, direct drive pump that will fit the b7100. Price is less than $200.00 shipped to me . Their model # is 5p1/41041gpo. I am still researching but this is looking good so...

According to my research on this form White House Products in the UK makes a replacement pump that some people on here have used in there b7100 . It is a 6 gal / min right hand rotation direct drive pump, and it is less than $200.00 shipped to me. Their pump model # 5p1/41041gpo. I can use...

Dan thanks for the reply. Strainers were cleaned and Hydraulic oil and filter were changed about 20 hrs ago. With it leaking hydro oil into the engine and thinning the engine oil I an not sure I want to start it back up and take a chance of engine damage . Can you think of any other cause...

1995 B7100 hst 4wheel drive , 700 hrs. lost all hydraulic function , no fel, no 3 pt, no power steering. I was about 1/4 mile from house after blocking up front end loader I drove it home. Engine oil is now over full , and hydraulic oil is just above the low mark on the dip stick. Do you...

Thanks for the suggestions. I had not thought about going with a 70/ 30 mix. But since it does not get very cold here and I keep it inside, I think that is a good idea. Nothing wrong with the rad. or cooling system , just thought I would change and flush the cooling system because of age of...

I want to flush the radiator and engine block on my B 7100. Since it does not have a water pump, what is the best way to flush the engine block ? Does the B7100 require special antifreeze? Is there a better way that just draining it , filling it with clean distilled water and running it for...

I know this is an old thread , but I thought I would add my home made weight pictures and maybe it would help someone with a new idea. I took 1/2 inch thick flat bar and made a bracket , welded a grade 8 1 inch bolt in the middle. went to the scrap yard and bought bar bell weights for...

I made mine out of angle iron and some 1" and 1/4 rebar. All were brought at the local scrap yard for 22 cents a pound. Total I have less than $20.00 in the forks and had enough left over to make a tooth bar.

Thanks Joe. and Hodge That is the information I was hoping for. I was not looking forward to trying to remove a wheel loaded with liquid, not counting the 100 lbs of wheel weights that have to come off. I will still have to remove one side of the rear sub frame of the FEL and put a bigger...

Thanks Guys for the information, From the picture Greenhead provided the strainer is 7" long, which is about all the room I have . Does any one know if both strainers are the same length ? I was hoping that some one that had a b7100 and had done this would chime in. Mine has turf tires...

1995 B 7100 hst 4 wheel drive. Does anyone know if I have to take the rear wheels off to pull out the strainers in the hst, to clean them? I have about 7" of clearance between the housing and the wheel, but I can't find any data on how long the strainers are. My rear tires are loaded with...

Why not just take the outside tines off your Caroni, which should make it a 46 " or smaller tiller and try it and see how it does and how you like it. That way you have both a narrow one and a wide one. mike

Does anyone know where I can find a drawing or a picture of a Kubota BL 1767 Quick Hitch? This is the quick hitch that works with a pin on bucket. I want to make one for my B7100 , but I would like to see a picture or drawing of one before I try to make it . I am making a fork attachment...