Search results

Here it is. It's perfect for my quick hitch.

Inside shot

Here's a couple of the set up

Here's the link. Now I must say, it wasn't the easiest thing I've modified but luckily I have the right tools to help quite a bit. They were quite a bit to large but I was able to mill them down to fit. The bracket was tricky to get the spacing just right. They do stick out in front of the hood...

Also made a bracket and mounted my suspension seat from my zero turn.

And the lights, not sure why two are sideways.

Only one at a time maybe.

Found some LEDs for the headlights. Had to do some modifying, and build a new bracket to make them work. They turned out great though, and dang their bright. Hope the pics work.

Just for the help of others in the future. the neutral holder arm on the hydro pedal had play in it because of the bushing alone. I went ahead and replaced the bearing while I was in there. Pretty simple fix really.

I knew you had and was going to be taking your advice regardless of what the dealer man said. Mine was actually loose enough I could almost tighten it with my fingers. I actually did use my fingers around the bare socket for a short time. I anugged it, but didn't make it very tight. We will see...

I stopped and checked with dealer today, and got to talk to a guy who seemed to know a lot about my tractor and kubota in general. He said to if the play is front to back, not side to side then just simply remove the retainer pin and snug the nut up in the front and it will probably solve it. He...

Also part of my problem. I use an iPad. We have a Mac lap top, but the wife uses it for work mostly. I need to try to find a hard copy of a shop or tear down manual. That oil pan sitting right there is freaking me out.

Yea I just tried again and no go. I don't have Firefox, what is that exactly? Sam it's a hst and that would be great if you could look that up. I've been trying to find it on the kubota books site, but I'm not having any luck. I just looked again and I'm scared now, it's right against the pile...

Wolfman, that was an awesome reply and very helpful. I tried kubotas site for drawings like that but they won't work with a Mac, believe it or not. Where did you get that drawing? Now if I can find the procedure to replace that stuff, any ideas on that?

I just purchase a b7100 hst 4x4 and have a front end question. I'm new to this so bear with me here. The entire front end seems to be held onto the frame by a front and rear pin of some sort. There is some play play in those pins when I move the steering wheel back and forth. Also after my first...

I'm gonna stop in and give them a shot today. What about these pitiful headlights, someone has to have ran into these before. There has to be a better solution. I've done some research and there is slot of talk about the "dynamo" which I've figured out is the alternator. But some say it is too...

Drove for about 7 hours today, but it was worth it i hope. I brought home a 1994 b7100 hst 4x4 with 1015 on the ticker. Looks good and runs good, but the forward pedal kept sticking. I have found that the "neutral holder arm" according to the manual has a lot of side to side play in it causing...

Newbie looking for some guidance. What's the real difference between these two? Ive seen the minir differences on tractor data but im looking for real world differences. They were making both for some time and I wonder why? I'm looking at both for a possible purchase. This will be my first...