Recent content by mike paulson

I'll be adding a snow plow blade with quick connect and with hydraulic angle. In other words I was planning on putting quick hydraulic couplers on the hoses that usually control the dump function on my loader bucket and connecting them to the power angle via quick hydraulic couplers. Any...

Thanks Dan, exactly what I'll do. Pretty sure I won't have to choke up 700 plus for a hydro cyl

I need a hydraulic cylinder for the angle function of my plow blade. So I checked Messicks and Kubota and to no surprise they want your first born, right arm, left testicle, and 3 pints of blood. Basically 700 for the cylinder. Anyone replace one of these or buy one thru Surplus Center or...

Does this temp gauge work off of the original engine temp sensor, or did you have it install and additional temp sensor. And if you did install a different sensor how did you do it?

I have a b2620 and plan on putting a quick attach on the loader. Was wondering if the Kubota B2673 plow 72 in quick attach (pictured)would be OK to mount on the LA364 loader on a B2620 tractor??

No, only the gauge.

Anyone have any info on installing a coolant temp Alarm/buzzer on a B Kubota. The gauge is great but can be overlooked just long enough to make the difference between a repair that cost mucho or just a leaky hose fix??? These little 3 bangers do not like to run hot and I'd like to know...

Yes I'm coming off of Covid myself. Get better soon

Yes pretty much what I was thinking. I'm just wondering what having the blade assembly so far out on the ends of the loader arms will do as far as bouncing or possibly torquing the loader arms and bending them. I will definitely fab this so if it doesn't work out I can go back to the original...

I might add that my main objective here is not have to remove the loader frame and to be able to retro my blade to a quick connect. Just looking for ideas

I already have a DIY quick attach setup on my loader frame. I use it to switch between my loader bucket and pallet forks. I just want to retrofit my existing Kubota frame mount snow blade and adapt it to a quick mount plate.

Hey guys, Any threads here about converting my B2620 frame mount snow plow to a quick connect system.

Your nuckin futs, get a real life

Got a lot of help from a fella named Chris Morse here on the math and type of hydraulic motor ide need, and the plumbing. Once I winch the log to the back of the tractor I chain them and lift the one end and off I go. I pull them up hills, thru swamp and lots of places I can't go with my...