Recent content by dmignogno

How muck weight is it rated for?

Thanks Hokie. I do have a 60" so I will get them ordered Thanks

I was thinking of adding 2 inch wheel spacers to the rear wheels on my BX25D. Has anyone who has done this had any problems with clearance with the MMM. It looks like it might be close to the deck wheels. Thanks in advance for any info.

I would play it safe and just change all of the fluids and filters. If you do find any water change the fluid run it for a while and change it again. Fluids and filters are cheap compared to major repairs due to water damage. Hope all goes well.

Start simple. Clear the codes to make sure its a hard code. If its a hard code it will come back. Local parts store might have scan tool you can use or harbor freight sells them cheap. You can spend a lot of money guessing your way through this so check to see what codes a present first. More...

Thanks for all your info. I did buy the pressure gauge and shims when I bought the tractor 3 years ago. The pressure was under specs then so I shimmed it up into the spec range. I checked it again two weeks ago and found it was at the low end of the specs so I shimmed it up again. This time to...

Did you replace the cylinders with different ones or did you rebuild the Kubota ones

Is there any way to increase the loader lifting power by a couple hundred pounds on a BX25D? My hydraulic pressure is adjusted to its high end of operating specs. Just would like a little more lift without having to buy a bigger tractor

2016 Tesla. 2016 Chevy Sent from my iPhone using Tapatalk

Does anyone make a 16inch backhoe bucket for the BX25D I have sandy soil easy digging. Bigger bucket would be faster.

Re: Ugrade from BX25D I don't need the belly mount mower. It is nice to have as a backup to our zero turn mower if it ever broke. I could remove the backhoe and loader and the house yard

Hi Guys I have a BX25D and I'm finding that a bigger tractor with more power would be better. We have an alpaca farm and I use the tractor a lot. I mow 1.5 acres every week. Use the loader to move alpaca poop, plow snow in the winter and use the backhoe when ever needed. I also have forks for...

Thanks Pete the info I needed was there. Thanks Again

Hi Guys I have a BX25D with a BX2506 3 point hitch kit. I broke a stabilizer link and my dealer can't find any parts information. Does anyone have a parts diagram or know were I can get one so I can fix my tractor and get back to work? Thanks Dennis

Update >>>> I talked to the owner of the dealer where I bought my BX25D and told him about the condensation. He said that it was a known problem and they would cover it under warranty. I called the dealership and we are making arrangements to replace it.