Recent content by chris989

hello, What was you outcome??? I am in the same boat. Chris

Hello all, I have a L4560 hoe attachment that until recently worked great despite its age. The Dipper/pick pulls in very sloooow, all the other hydralucis are good. I had the bucket and dipper/pick cylinders rebuilt ( leaked a little) thinking maybe a seal was the cause. reassembled and...

Please delete post. Chris.

i need the inner also, https://www.ebay.com/p/16025452908 Not 100% sure about the quality of this one but it is 120$ says "fits" Kubota and the brand is Kubota. waiting to hear back from the seller

Hello all, I am in the same boat as others and search some older threads. Kubota wants ~$400 per side for my tie rod assembly. Both the inner and outer are toast on both sides so this is almost a grand to replace. I have been searching catalogs for the inners 35080-4460. I can fab just...

Hello All, I have a L3450 and need of the outer tie rod end. My dealer says 175 ++ for just the end and ~350 for the assmbly (inner and outer) I can not find the part number for the outer but the whole assembly # is 35080-44640. I already cut the female coupling off so i can weld in just...

I've been running this tractor for years and never looked at that switch. Sure enough it has a heat element symbol to the left. Next time i have it in the shop I will make sure i am getting voltage to the plugs.. Do you own a 3450? I have an injector question if I may? Chris

Hello all, Silly question alert. Is it possible my glow plugs show light while cranking only? I honestly thought this tractor did not have any. (The yanmar in my boat didn't) I have never heard a relay, my dash is a mess, only the fuel gauge works. Anyway, it always starts. Even...

There are a few l2264 buckets less than 400$ on the web. I really don't need to quick change, Other than forks, i doubt my tractor has enough hydraulic flow to run any powered attachments. I am going to have one shipped and cross my fingers. Worst case i have to fab a little. My old...

I use the Kubota parts site a lot. THe part number is 70001-00066. Problem is, 70001-00066 is the part number for 13, 18, 24 and 30 inch bucket and it is 11 cents Somethings not right. I am waiting to hear back from my local dealer but as of now no one has any info. Chris

does anyone know where to find/buy/or have replacement buckets for a 4560 backhoe? I have the 13 inch and am looking for some thing larger. L4565 or l4564 Chris

Hello All, I have a la650 loader on my 3450 tractor and need a new bucket. The original is 60" wide and my tractor track is 72 wide. It is a real pain not being as wide as the track. I have been searching for a off the shelf bucket and it appears a LA703 bucket is 72 wide and should work...

My horrible math calculates i need a 33" dia tire for the front. 12.4-24 = 45" 45"x 3.14 = 141 circumference. 141 divided by the correct 10-16.5 (30.4") = a ratio of 4.6480" If i take my incorrect 17.5-24s 17.5-24 = 49 dia 49 x 3.14 = 153 153 / 4.6480 ratio = 33" Does this math seem...

the fronts are Denman skid steer plus 10-16.6 (30.4" dia). when i look at the part list, there ar a handull of tires listed for the front. the 10-16.5 are one of them so i guess it is right?

Hello, I have a L3450. I am in need of new rear tires. I always knew something was a miss because in 4wd i had drag. OEM calls for 12.4-24s (45"dia) I have 17.5-24s (49"dia) I was going to buy the 12.4s but they call for a much narrower rim. My 17.5s are on a 15 inch wide rim. any ideas...