Search results

hello, What was you outcome??? I am in the same boat. Chris

Hello all, I have a L4560 hoe attachment that until recently worked great despite its age. The Dipper/pick pulls in very sloooow, all the other hydralucis are good. I had the bucket and dipper/pick cylinders rebuilt ( leaked a little) thinking maybe a seal was the cause. reassembled and...

Please delete post. Chris.

i need the inner also, https://www.ebay.com/p/16025452908 Not 100% sure about the quality of this one but it is 120$ says "fits" Kubota and the brand is Kubota. waiting to hear back from the seller

Hello all, I am in the same boat as others and search some older threads. Kubota wants ~$400 per side for my tie rod assembly. Both the inner and outer are toast on both sides so this is almost a grand to replace. I have been searching catalogs for the inners 35080-4460. I can fab just...

Hello All, I have a L3450 and need of the outer tie rod end. My dealer says 175 ++ for just the end and ~350 for the assmbly (inner and outer) I can not find the part number for the outer but the whole assembly # is 35080-44640. I already cut the female coupling off so i can weld in just...

I've been running this tractor for years and never looked at that switch. Sure enough it has a heat element symbol to the left. Next time i have it in the shop I will make sure i am getting voltage to the plugs.. Do you own a 3450? I have an injector question if I may? Chris

Hello all, Silly question alert. Is it possible my glow plugs show light while cranking only? I honestly thought this tractor did not have any. (The yanmar in my boat didn't) I have never heard a relay, my dash is a mess, only the fuel gauge works. Anyway, it always starts. Even...

There are a few l2264 buckets less than 400$ on the web. I really don't need to quick change, Other than forks, i doubt my tractor has enough hydraulic flow to run any powered attachments. I am going to have one shipped and cross my fingers. Worst case i have to fab a little. My old...

I use the Kubota parts site a lot. THe part number is 70001-00066. Problem is, 70001-00066 is the part number for 13, 18, 24 and 30 inch bucket and it is 11 cents Somethings not right. I am waiting to hear back from my local dealer but as of now no one has any info. Chris

does anyone know where to find/buy/or have replacement buckets for a 4560 backhoe? I have the 13 inch and am looking for some thing larger. L4565 or l4564 Chris

Hello All, I have a la650 loader on my 3450 tractor and need a new bucket. The original is 60" wide and my tractor track is 72 wide. It is a real pain not being as wide as the track. I have been searching for a off the shelf bucket and it appears a LA703 bucket is 72 wide and should work...

My horrible math calculates i need a 33" dia tire for the front. 12.4-24 = 45" 45"x 3.14 = 141 circumference. 141 divided by the correct 10-16.5 (30.4") = a ratio of 4.6480" If i take my incorrect 17.5-24s 17.5-24 = 49 dia 49 x 3.14 = 153 153 / 4.6480 ratio = 33" Does this math seem...

the fronts are Denman skid steer plus 10-16.6 (30.4" dia). when i look at the part list, there ar a handull of tires listed for the front. the 10-16.5 are one of them so i guess it is right?

Hello, I have a L3450. I am in need of new rear tires. I always knew something was a miss because in 4wd i had drag. OEM calls for 12.4-24s (45"dia) I have 17.5-24s (49"dia) I was going to buy the 12.4s but they call for a much narrower rim. My 17.5s are on a 15 inch wide rim. any ideas...

Hello All, Can anyone direct me to a replacement filter for my L3450 Kubota numbers are; 30400-37710 30401-37580 I think napa gave me the wrong ones last time, maybe to fine of micron because in the cold nothing wants to work. On the backhoe attachment, the spring loaded bypass ate the...

sorry for the delay, I picked up a shackle and a 5/8 bolt the other day and i will fab up something that matches the other side. Thanks or the replies, Chris

Hello all, Does anyone know where i can locate one of these eye bolts in the picture. Finally got around to fixing up my stabilizers and i am missing one eye bolt. it is 5/8 thread with a .500 hole. everything i find with 5/8 thread has a 1.250 hole or bigger. I can fab something up but...

update, after a closer inspection,, the c clip is distorted, I tried to install it on the shaft while out of the case and i can easily slip it on an off without snap ring pliers.

This thread picked up here if it is of help to anyone. http://www.orangetractortalks.com/forums/showthread.php?t=15860