Recent content by audiocontr

Thank you Dave! Great suggestion. I will do so. I believe it is a 3 way (Up down curl float), or is that a 4 way? Could you point me to alternative valve assemblies to research (just in case)?

my good ol 1000 hour BX2200 with LA211 started having an issue recently. The down function is no longer smooth. Its very jumpy, especially when weighted with anything in the bucket. It almost feels like its all or nothing when i push the control forward. For what its worth - It holds weight just...

Sorry, i wasnt clear. I'm in need of an inner ball joint to replace a environment destroyed original. There is a plastic ring inside the ball cup that fell apart.

Just ordered a set! Anyone have a hookup on the inners? Found that one of mine is has a broken plastic insert ring

BUT drilling the ring is a pain in the butt. Get a nice bit and drill just to the front of the ring clip channel until it breaks through. I used a punch to move the ring... its a lot of force FWIW i only removed one end as i could not get the other out.

I cannot believe the price of replacement tie rod ends. There HAS to be something from another vehicle that will work. Suggestions?

Necro Just in case someone has the same issue... Im assuming the opposing end of the flat stock (section you can get a 21mm wrench onto) Place the end of the shaft with the two flat edges onto the end of a large vise so it hangs over your work bench. REALLY tighten it... even a couple of...

Hmm. Good point. Are there grease fittings on the front axle and drive shaft? I checked the fluids in the front dif start of the season. I'll check again

We've been using the bx2230 heavily the last few weeks and I noticed a new sensation when using 4 wd drive. I can feel a clicking while turning hard or moving forward only when the 4wd is engaged. I suspected u joints. Inspection of the two exposed are good. No real play. Could there be...