Black Mold - How to remove it?

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,188
4,773
113
North East CT
I have a yellow plastic fuel tank that has black mold on the inside bottom. If I put fuel into the tank, some will flake off and mix with the fuel, so the tank is now officially "offline". Any suggestions on how to remove the black spots at the bottom of the tank?
 

MapleLeafFarmer

Well-known member

Equipment
Lots incl. B and L kubotas
Dec 2, 2019
617
470
63
E.
how big of tank?

assuming 5 gallon you could try a mix of bleach and water.... 1 cup bleach per gallon of water, add, agitate, drain, rinse, repeat and I would bet this will clean it up on the cheap.

I used to do same on plastic animal water troughs but I could brush mixture with a old curling brush as well
 
  • Like
Reactions: 1 users

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,842
5,066
113
Eastham, Ma
I have a yellow plastic fuel tank that has black mold on the inside bottom. If I put fuel into the tank, some will flake off and mix with the fuel, so the tank is now officially "offline". Any suggestions on how to remove the black spots at the bottom of the tank?
Bernzomatic torch? :ROFLMAO:
 
  • Like
Reactions: 1 users

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,728
5,392
113
40 miles south of Kansas City
Do like Mapleleaf suggested, mix bleach with water, agitate, then vacuum it out with a shop vac. If vacuum hose is too large dia. find an old house vacuum cleaner hose and adapt it down.
 
  • Like
Reactions: 1 users

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,229
763
113
Hadashville, Manitoba, Canada
I have a yellow plastic fuel tank that has black mold on the inside bottom. If I put fuel into the tank, some will flake off and mix with the fuel, so the tank is now officially "offline". Any suggestions on how to remove the black spots at the bottom of the tank?
I second the pressure washer idea, and you could just take it to a car wash for that treatment if you don't have access to a washer at home.
 

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,750
2,932
113
North of Pittsburgh PA
How did you determine it is black mold,

I mean as compared to black dirt, or something?

I have seen something similar in my fuel containers…just curious really. No doubt cleaner is better.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
29,938
6,122
113
Sandpoint, ID
Soltron algaecide should remove it.
 
  • Like
Reactions: 1 user

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,188
4,773
113
North East CT
How did you determine it is black mold,

I mean as compared to black dirt, or something?

I have seen something similar in my fuel containers…just curious really. No doubt cleaner is better.
I can only assume that it is mold, but that assumption comes because I found some water in the diesel fuel that was left in the container. I poured that fuel, about a quart into a clear plastic gallon jug and allowed it to settle. That is when I found the water and the black particles floating in the fuel. Diesel + water = black mold. I will pressure wash it in the spring, so I can leave it in the sun to evaporate whatever moisture is left behind. Thanks for the suggestions, especially the Bernzomatic torch. I will try that on my gasoline containers when they are empty!
 

wp6529

Active member

Equipment
B7100DT
Oct 31, 2023
152
97
28
TX
I regularly treat all my diesel tanks with biocide (Bio-Kleen). The diesel tampons (snakes, etc. water absorbers) placed in the tanks periodically area also helpful.

For cleaning the tank I'd also suggest some gravel, nuts and bolts or something similar to scrub as you agitate the cleaning solution.

Ultimately, unless it's a huge amount coming out I'd expect the fuel filter to handle it just fine and not worry about it.
 
  • Like
Reactions: 1 user

parttime1017

New member

Equipment
B6100E Kubota
Feb 2, 2021
17
9
3
Maryland
I have a yellow plastic fuel tank that has black mold on the inside bottom. If I put fuel into the tank, some will flake off and mix with the fuel, so the tank is now officially "offline". Any suggestions on how to remove the black spots at the bottom of the tank?
Peroxide 12% is good for killing black mold. 3% will work but takes longer.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
29,938
6,122
113
Sandpoint, ID
It's not mold, its bacteria or some call it algae, that grows in the water in the fuel.
A biocide like I posted earlier or others will get rid of it.
 
  • Like
Reactions: 3 users

wp6529

Active member

Equipment
B7100DT
Oct 31, 2023
152
97
28
TX
It's not mold, its bacteria or some call it algae, that grows in the water in the fuel.
A biocide like I posted earlier or others will get rid of it.
It lives at the water/fuel border layer and eats the diesel fuel as its food. What collects at the bottom is dead stuff.
 
  • Like
Reactions: 1 users