my bucket on my LA525 loader isn't level while parked on a good flat level surface. the left side of the bucket is still about one inch off surface when right side touches.
I believe this has been the case since I purchased year an half ago by a smaller margin, but cannot be sure. I am thinking check the mounting bolt torque and to go thru a re-install procedure if it is suspected the mount has slipped. I have measured the loader arms height from the floor of my garage and there is a slight difference.
I don't think I have bent or distorted the loader, but I will keep that in mind as a possibility.
Advice or comments from anyone having such experience and dealing with similar problems would be appreciated.
TN road dog
I believe this has been the case since I purchased year an half ago by a smaller margin, but cannot be sure. I am thinking check the mounting bolt torque and to go thru a re-install procedure if it is suspected the mount has slipped. I have measured the loader arms height from the floor of my garage and there is a slight difference.
I don't think I have bent or distorted the loader, but I will keep that in mind as a possibility.
Advice or comments from anyone having such experience and dealing with similar problems would be appreciated.
TN road dog