Torque specs required

ASCHOICE

New member

Equipment
Kubota ZB1500
Jul 16, 2019
14
0
1
Argouges FRANCE
Hi all,
Having split my kubota zb1500dt tractor to replace the rear engine crankshaft seal and replacing a clutch, I am now putting it all together again. Does anyone know what torque I need to apply to the bolts that screw into the crankshaft seal holder. The bolts are marked 7 on the head. Any help would be appreciated. Thanks
 

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
6,669
3,214
113
Myersville, MD
windyridgefarm.us
Hi all,
Having split my kubota zb1500dt tractor to replace the rear engine crankshaft seal and replacing a clutch, I am now putting it all together again. Does anyone know what torque I need to apply to the bolts that screw into the crankshaft seal holder. The bolts are marked 7 on the head. Any help would be appreciated. Thanks
Bolts marked with a 7 are Kubota's equivalent to ISO property class 8.8, Absent a workshop manual specification use this chart:

Dan

FastenerTorques.jpg
 
  • Like
Reactions: 1 user