olekid
Member
Equipment
B7510,loader, Curtis heated cab, loaded tires snowblower,grader blade,snow plow
Greetings fellow Kubotians, Olekid here, I saw a spill guard Wildfire made for his bucket and thought I can make one of those for my 48 inch bucket. Here are some pictures of the start. Used 1 pc flat bar 4" x 48" x 3/16", 2 pcs flat bar 4" x 12" x 3/16" and 1 pc 1" square tubing 48" long, 11 bolts and washers and nuts 5/16 x 1" and I'll paint it with some paint I already have. The only thing I could not do was cut a straight 3/16" slice down one side of the tubing to slide over the top of the flat bar for strength, cost me $40 at a machine shop. All the rest I am doing myself. Attached are some pics so far of the project.
