Hello Everyone, I have a B2650 HSDC and recently purchased a Kubota snowblower. Its a B2782B 63" front snowblower. It came off of a B2650 without a cab, so it has a manual chute rotation handle. So I've been told I need the Kubota B2756 kit, just to operate the chute rotation with my cab tractor. Is this the correct kit that I need? Anyone happen to have one? Any other ideas? Thanks in advance to any help & advice!
Snowblower Chute Rotation Advice
- Thread starter 66ChevelleGuy
- Start date
You'll find several different ways to do it. Here's my method for the L3200 / Pronovost setup I had. A small motor to rotate the chute via a slightly modified crank and a linear actuator to raise and lower the discharge. One DPDT switch for each on a cord that dangled in the cab.
Action shot:
Action shot:
Attachments
Last edited:
This is wholegoods pricing from 2021- today's pricing will be different. Wholegoods is purchased through Kubota sales, not the parts desk.
