Replacing the LCD monitor in a KX41-3v.

oldnslow

New member

Equipment
L2900, JD2020, KX41-3v, Torro 5&7 gang reel mower
Jul 24, 2021
9
2
3
38251
Having to replace the LCD monitor in a KX41-3v. I was looking around and on Alibaba they have a listing for a KX36-3, 41-3s, 41-3v, U30-5 and a RX5

Can anyone confirm that these monitor can be swapped between models...
 
Last edited by a moderator:

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
6,092
1,849
113
Austin, Texas
All I can suggest is to go to Messicks and try to locate the part number. Then you can click on the part number and see the cost. On that screen is a button (at the lower part) that say “show models”. That will list all the models the part will fit onto.

 
  • Like
Reactions: 1 users

oldnslow

New member

Equipment
L2900, JD2020, KX41-3v, Torro 5&7 gang reel mower
Jul 24, 2021
9
2
3
38251
All I can suggest is to go to Messicks and try to locate the part number. Then you can click on the part number and see the cost. On that screen is a button (at the lower part) that say “show models”. That will list all the models the part will fit onto.

Good info,,, thanks a bunch.
Went to the sight and checked. It was not reflected in the listing.
I never new you could check that way. I sure wont forget..
Im sure Ill use it a lot...
 
  • Like
Reactions: 1 users