Removing lever grips

[BlueRidgeRunner]

Hi,

Looking to replace the weathered lever grips on my bx2360. Tried heating them up with a hair dryer but they would not budge. Thinking I will need to cut them off. Anyone know how they are attached?

 

[mikester]

Show a pic. Usually they just pull off.

 

[GreensvilleJay]

Yellow PTO ones (left side) are push on fit. I used an open end wrench,whack the face,POP off the cover...then spend 10 minutes looking for it in garage.........good thing it's yellow !
The only tricky one is the 3PH valve, hard plastic, 5" long. It's held on by an internal rollpin. Rotate 90* then it'll come off.worst case, $10 to replace. BTDT.

 

[Dustball]

Air nozzle at the base of the grip, usually can blow them off.