Rear Hydraulic Stop for BX24 Help Needed

[Spook1]

You guys already helped me out on my shaft for my mid mount mower so I figured I would ask another question.

I was using my bush hog this weekend on my new to me BX24. Is there any kind of downward stop adjustment for the hydraulics. Basically, if I get my bush hog leveled and at the right height, is there anyway to have the hydraulic stop at this point? Mine now basically raises and then will lower all the way to the ground if the lever is held in. I have been trying to just slowly raise it and lower it and then eyeball it to where I want it to be. I was wondering if there was any kind of stop to have it only be lowered to the level I want it. I hope I am explaining this to where it will make sense.

Thanks in advance.

 

[Diydave]

easiest way would be to get a depth stop kit, it's basically a chain and connector, that mechanically controls the lower limit of 3 point travel. it attaches to the toplink and to each arm of the lower link.