G'Day,
Wondering if anyone knows the correct pressure rating for the radiator cap for a B6000. Mine came with a cap stamped 0.7 (which i assume is bar) this equates to 10 psi. Anyway it was leaking and all i could source locally was a 7psi cap which also lets fluid out the overflow.
None of my B6000 literature states the cap pressure hovever my service manual for the B6100 states a cap pressure of 13psi.
I noticed the level was down near the top hose level which is a bit concerning.
Any advice appreciated.
Cheers,
Andy
Wondering if anyone knows the correct pressure rating for the radiator cap for a B6000. Mine came with a cap stamped 0.7 (which i assume is bar) this equates to 10 psi. Anyway it was leaking and all i could source locally was a 7psi cap which also lets fluid out the overflow.
None of my B6000 literature states the cap pressure hovever my service manual for the B6100 states a cap pressure of 13psi.
I noticed the level was down near the top hose level which is a bit concerning.
Any advice appreciated.
Cheers,
Andy