Pull the mower deck for winter, or leave it on?

b2601scott

New member

Equipment
Kubota B2601
Nov 10, 2026
3
0
1
Central Michigan
Trying to decide what to do with the deck on my B2601 this winter. It's the 60-inch, and pulling it means finding somewhere to store it until spring. Leaving it on means it hangs there all winter.

What do you all do? And if you leave yours on, is there anything worth doing to it before it sits?
 

Ping

Well-known member

Equipment
BX2370-1
Dec 25, 2018
382
406
63
Troy, Ohio
Do you use your tractor to plow snow? If you do, I'd pull the deck, service it and find a cozy place to store it. You can stand them vertical which minimized storage space but, check that the gearbox vent isn't leaking oil. If you don't plow snow, I'd still pull the deck, service it and reinstall for spring.
 

Runs With Scissors

Well-known member

Equipment
L2501 TLB , Grappel, Brush Hog, Box Blade, Ballast box, Forks, Tiller, PH digger
Jan 25, 2023
4,203
5,681
113
Michigan
I don't have one, but why is "hanging there" a problem?

Just curious 🤷‍♂️
 
  • Like
Reactions: 1 user

Bearcatrp

Well-known member

Equipment
Oversized Garden Tractor (aka BX1880) with loader, mower and 3 point
Mar 28, 2023
1,440
1,048
113
Minnesota
I take mine off for winter duties. You won't like going through high drifts with the mower deck on.
 
  • Like
Reactions: 1 users

Grandad4

Active member

Equipment
1949 Farmall M, previously owned: L 4610, BX 2230
Apr 5, 2016
456
201
43
Greensboro, NC
I don't have one, but why is "hanging there" a problem?

Just curious 🤷‍♂️
Hanging there to catch the mailbox, a rock or deep snow. A tripping hazard for old, sorta clumsy folk like me. Getting it caked with slush, ice and other winter crud ain't a good idea. Etc. Besides it's a real tractor, not a riding mower. You'll confuse the neighbors. Cheers!
 
  • Like
Reactions: 1 users

SDT

Well-known member

Equipment
B1750 with MMM. Everything else sold prior to relocation.
Apr 15, 2018
3,720
1,442
113
Montana
Trying to decide what to do with the deck on my B2601 this winter. It's the 60-inch, and pulling it means finding somewhere to store it until spring. Leaving it on means it hangs there all winter.

What do you all do? And if you leave yours on, is there anything worth doing to it before it sits?
I always remove all mowers after last fall usage.

MMMs are more easily serviced when removed and blades more easily sharpened.

FWIW, I stand the MMM from my B1750 up on it's front gage wheel brackets over the off season. Very easy to remove and rotate blades and takes up less floor space.
 
  • Like
Reactions: 1 user

Red Dog Tractors

New member

Equipment
Kubota L Series
Nov 11, 2026
3
2
1
Austin, Texas
I don't believe I've ever regretted putting up my tools and taking the time to service them. It's a good opportunity to grease the spindles, check the gearbox oil, scrape the underside and touch up any bare spots so rust doesn’t start over winter. Standing it on end against a wall (gearbox vent up) takes up surprisingly little room, and a piece of plywood or a couple of 2x4s under it keeps it off a damp floor. If you’re running a blade or blower this winter, having the deck off also gives you better ground clearance and keeps it out of the slush. Snap a quick photo of the linkage and pin locations before you pull it, and spring install goes a lot faster.
 
  • Like
Reactions: 1 users

bbxlr8

Well-known member

Equipment
L2501 w/R14s, LA525, BH77, SGC0660, CL 5' BB, CL PHD, WG24 + Ford 1210 60" mmm,
Mar 29, 2021
456
314
63
Eastern PA
Not quite the same as B or BX, but I always leave my 60" mm on my 1210. It is very HEAVY and I service in spring out of habit. However, the only winter duties are a final leaf chop after TG and pulling a 4x6 firewood trailer.
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
16,033
5,761
113
SW Pa
For my money with my B I leave the deck on, sure there are down sides, but that extra 400 or so pounds doesnt hurt a thing when you need traction,,, Just MHO
 
  • Like
Reactions: 1 user

b2601scott

New member

Equipment
Kubota B2601
Nov 10, 2026
3
0
1
Central Michigan
Do you use your tractor to plow snow? If you do, I'd pull the deck, service it and find a cozy place to store it. You can stand them vertical which minimized storage space but, check that the gearbox vent isn't leaking oil. If you don't plow snow, I'd still pull the deck, service it and reinstall for spring.
That's a good tip. I hadn't even thought about checking the gearbox vent before standing it on end. If I end up pulling the deck, I'll take a closer look at that. Finding a spot for it is still the tricky part.