Middle Buster to Subsoiler

[RCW]

Nothing too fancy.

Cut and welded 2- 1/4" pieces of old manure spreader chain paddles to make a 1/2" thick point.

TSC middle buster has 17" mouldboard - way too wide for what I'm doing.

Also remembered some subsoilers are too long for the smaller tractors. Hope this is not too short.

Not sure if it'll work, but what the heck!!

Had fun in the garage doorway enjoying the fall sun and making sparks!!

 

[Daren Todd]

Good job on the subsoiler. It's nice when we can put our toys.......er...........Tools to work And make something useful at the same time

 

[Diydave]

You can get 1 more implement outta that subsoiler, if you weld a curved section of 2" curved pipe, with the curve pointed backwards... Viola! a cable/pipe layer...

 

[RCW]

Thanks, guys.

Turned out the point was a hair short, didn't clear the bottom of the frame.

Welded on a narrower extension from the same scrap, went to about a foot deep first pass!!

Really liking the Lincoln MP210!!

Dave - I do have some conduit to run......

 

[Daren Todd]

Thanks, guys.

Welded on a narrower extension from the same scrap, went to about a foot deep first pass!!

Really liking the Lincoln MP210!!......

Having a welder at the house is just like having the Bota You find sooooo many things you can do with it