Laser cut L2501 floor mats

[MSG H]

I also purchased a set. If I didn’t know any better, I would call them OEM. Very satisfied Hawk

 

[Hawk67]

I purchased a set of these mats from Hawk67. They shipped fast and fit my Kubota L3301 perfectly. Very pleased with them.

Gene G,
I’m glad you like them! Thank you sir for your purchase!

Hawk67

 

[Hawk67]

I also purchased a set. If I didn’t know any better, I would call them OEM. Very satisfied Hawk

MSG H,
Glad you like them! I also appreciate the pictures you shared. Your tractor looks nice! Thank you sir for your purchase!

Hawk67

 

[BD-KUB]

Hello, yes the mats just lay in place and stay. They are easy to install and remove. The rubber is 1/2" thick. I am willing to make these available. I know they will fit a L2501 HST as that is what I have. Since the L3301 and L3901 are suppose to be the same except for engines I would assume they would fit those HST models too. If there is any interest for a set the cost is $95 + shipping. Send me a PM if interested and we can work out the details. Thanks

I ordered 2 sets of Mats from Hawk67, for myself and a buddy. We're both very pleased with the finished product. Hawk67 was quick with replys and even shipped to Canada! Worth every penny even with the 30% exchange rate for us up in the great white north!

 

[Hawk67]

I ordered 2 sets of Mats from Hawk67, for myself and a buddy. We're both very pleased with the finished product. Hawk67 was quick with replys and even shipped to Canada! Worth every penny even with the 30% exchange rate for us up in the great white north!

BD-KUB,
Glad you liked them! Thank you sir for yours purchases.

Hawk67

 

[RB52]

Got my set delivered today for my L2501. Kubota couldn't make a higher quality or a better fitting set of floor mats. The entire process was a pleasure, quick and hassle free. Thanks!

 

[Hawk67]

Got my set delivered today for my L2501. Kubota couldn't make a higher quality or a better fitting set of floor mats. The entire process was a pleasure, quick and hassle free. Thanks Ken!

Glad you like them! Thank you for the compliments on the mats and it was a pleasure talking to you. Thanks!

 

[jimh406]

My mats got here for my L2501 HST today. I have to say the mats are fantastic. Very tough and I can’t wait to use them.

I’m definitely another happy customer!

 

[Hawk67]

My mats got here for my L2501 HST today. I have to say the mats are fantastic. Very tough and I can’t wait to use them.

I’m definitely another happy customer!

Thank you for the feedback sir! I’m glad you are happy with the mats! Thanks for your purchase.

Thanks
Ken

 

[Mak65]

My set for my L2501 arrived from Ken (Hawk67) this past Friday. installed them yesterday. They look great and fit perfectly snug. They replace a thin set I had made that were always moving.

Ken was great to work with and I ordered just before the severe cold snap in Houston. I am located just NW of Houston. When he realized this he checked in on us almost daily to see how we were faring.

Couldn‘t ask for a better person or product!

 

[Hawk67]

My set for my L2501 arrived from Ken (Hawk67) this past Friday. installed them yesterday. They look great and fit perfectly snug. They replace a thin set I had made that were always moving.

Ken was great to work with and I ordered just before the severe cold snap in Houston. I am located just NW of Houston. When he realized this he checked in on us almost daily to see how we were faring.

Couldn‘t ask for a better person or product!

Thanks Mak65! Glad you like the mats! Also glad you made it through the sever weather. Good to chat with you and thanks!

 

[Spike1979]

Hello all. My Kubota and I are relatively new to the forum, and I have enjoyed reading posts, etc. This Summer I was tired of watching the orange platform on my L2501 get scratched from my boots when climbing on and off. So I designed and cut real rubber floor mats with my 60-watt Laser. They fit perfectly and can be lifted for cleaning and to wipe water/moisture easily. I didn’t want a rubber painted platform like some others I’ve seen. The left and right pads are independently replaceable. The orange and black scheme looks natural and provide the non-slip grip. Not sure if anybody has tried this approach yet.

Good morning, I am new to the site and wanted to know if you are making these mats for purchase ? Great job. I have a L2501DT. Thank you.

 

[jimh406]

Good morning, I am new to the site and wanted to know if you are making these mats for purchase ? Great job. I have a L2501DT. Thank you.

hawk67 makes some thick ones for HST models. I’m not sure if he could make them for the DT. See the pics here. https://www.orangetractortalks.com/forums/threads/laser-cut-l2501-floor-mats.48142/post-438164

Fwiw, I bought a set for my HST, and I really, really like them.

 

[Spike1979]

hawk67 makes some thick ones for HST models. I’m not sure if he could make them for the DT. See the pics here. https://www.orangetractortalks.com/forums/threads/laser-cut-l2501-floor-mats.48142/post-438164

Fwiw, I bought a set for my HST, and I really, really like them.

I will check them out. Thank you.

 

[Longview]

My set for arrived for my L2501. Order from Ken (Hawk67) and he is great to work with. Couldn't like these mats anymore and quality is top notch! Super easy to install, perfect fit, lock in place and lift out easy for cleaning. Way to step up and create a great product for a gap in the market!

 

[Cranblue]

Hello all. My Kubota and I are relatively new to the forum, and I have enjoyed reading posts, etc. This Summer I was tired of watching the orange platform on my L2501 get scratched from my boots when climbing on and off. So I designed and cut real rubber floor mats with my 60-watt Laser. They fit perfectly and can be lifted for cleaning and to wipe water/moisture easily. I didn’t want a rubber painted platform like some others I’ve seen. The left and right pads are independently replaceable. The orange and black scheme looks natural and provide the non-slip grip. Not sure if anybody has tried this approach yet.

Start selling them !!

 

[Hawk67]

Start selling them !!

Hello, I do sell the CNC cut mats. If interested PM me. Thanks