Kubota Deluxe Telescopic Sway Bars

[Thys]

Good day all,

Need a favor please. Here in South Africa these cost more than I paid for my tractor. (Have to admit that my tractor was sold as spares in boxes.) I have built the tractor up over the past 3 years and would like to add the sway bars. I have no retaining equipment on my 3 point at present.

I would like to fabricate these myself due to the high cost. Can someone with this fitted please give me the dimensions? Mostly the tube and wall thickness, the bat sizes and the hole distances.

This will be highly appreciated.
Regards Thys

 

[Trimley]

I don't have the bars. I would think they would be easily made. A piece of 3/8" flatbar inside a piece of 1/8" wall rectangular tubing. Spacing would not need to be spot on. Attach an implement, measure, divide by 2, cut, make it so they connect on each end. Then slide one into the other. Slide to full extension, clamp, mark and drill all the holes. It seems simple to me.