I want one...
- Thread starter Diydave
- Start date
Daren Todd
Well-known member
Lifetime Member
Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
Need to put that on my list for santa. I would have loved to have something like that when I unloaded 2 ton of gravel by hand last week 
Lil Foot
Well-known member
Lifetime Member
Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
I have seen something like this underground in some hard rock mines and hard coal mines, but they ran on either air ( noisy like you wouldn't believe) or electric 480 3 phase not to bad to be around, And they were playing around with a little diesel unit before i retired but the motor and scrubber was almost as big as the whole unit by it self. Sure beats using a shovel and wheel barrel thats for sure
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
I am thinking two hours on that thing would beat you to death.
Of course, in my "stupider-cheaper" pre-tractor days I would have loved to have that. One Spring, I took two loads of material on my driveway that totaled 15 tons. I moved it all to the rear of the place using a wheel barrow and a flat shovel over four days. I wore my shovel down about an inch!
What a great vacation!!!
Of course, in my "stupider-cheaper" pre-tractor days I would have loved to have that. One Spring, I took two loads of material on my driveway that totaled 15 tons. I moved it all to the rear of the place using a wheel barrow and a flat shovel over four days. I wore my shovel down about an inch!
What a great vacation!!!