I need B6200 hydraulic pump anyone know

[Budvoss]

i have a B6100 and the pump housing has a crack in it. I bought a new german replacment pump and that broke its input shaft at the slip coupling. i set pressure to 2000 psi, and flushed system. the replacement pump is not froze up just input shaft twisted off. does any one have a pump or know where i can get one in the usa, thanks



Uploaded with ImageShack.us

 

[South 40]

Hey Budvoss,

Have you considered trying to use the output shaft of the pump with the broken case in the new pump?

It may not work but might be worth checking out.

Mostly it will depend on how closely the German made unit is to the other one, if they duplicated it close enough then perhaps you can get up and running faster and cheaper than buying another new pump.

Best Regards

Paul

 

[Budvoss]

i thought of that but shaft on german pump is longer. Im thinking of using a jaw type coupler and add a pump to the front crank shaft. I cant find the right splined coupling to fit tractor so that is the reason for the jaw coupling. I can than use a inexpensive pump from northern hydraulics

http://onlinecatalog.tpa-us.com/viewitems/jaw-shaft-couplings/urved-jaw-type-flexible-shaft-couplings-clamp-type?